EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Rheology of Dental Photopolymers for SLA/DLP/MSLA 3D Printing

Luka Šimunović iD, Luka Brenko iD, Antun Jakob Marić iD, Senka Meštrović iD, Tatjana Haramina iD

Polymers · 08.10.2025 · 17 (19) · 2706

DOI: 10.3390/polym17192706 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 08.10.2025. Verfasst von Luka Šimunović und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthodontics, School of Dental Medicine, University of Zagreb, 10000 Zagreb, Croatia. Die Arbeit wurde bisher 43-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Zagreb, “Advanced Additive Technologies in Dental Medicine”, “Polymers for Additive Manufacturing”.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Vat photopolymerization 3D printing, including stereolithography (SLA), digital light processing (DLP), and masked SLA (mSLA), has transformed dental device fabrication by enabling precise and customizable components. However, the rheological behavior of photopolymer resins is a critical factor that governs the printability, accuracy, and performance of printed parts. This review surveys the role of viscosity, shear-thinning, and thixotropy in defining the “printability window” of dental resins and explores the relationship between these properties and the formulation and final material performance. Rheological characterization using rotational rheometry provides key insights, with shear rate sweeps and thixotropy tests quantifying whether a resin behaves as Newtonian or pseudoplastic. The literature shows that optimal printability typically requires resins with low to moderate viscosity at shear, moderate thixotropy for stability, and formulations balanced between high-strength oligomers and low-viscosity diluents. The addition of fillers modifies the viscosity and dispersion, which can improve reinforcement but may reduce print resolution if not optimized. Thermal and optical considerations are also coupled with rheology, affecting the curing depth and accuracy. In conclusion, controlling resin rheology is essential for bridging material formulation with reliable clinical outcomes, guiding both resin design and printer process optimization in modern dental applications.

Schlagwörter

Stichwörter der Autor:innen

dental 3D printingphotopolymer resinsrheology

Autor:innen und Institutionen

  • Department of Orthodontics, School of Dental Medicine, University of Zagreb, 10000 Zagreb, Croatia.
  • Department of Materials, Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, 10000 Zagreb, Croatia.
  • Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, 10000 Zagreb, Croatia.

ORCID-Profile: Luka Šimunović, Luka Brenko, Antun Jakob Marić, Senka Meštrović, Tatjana Haramina

Förderung

  • University of Zagreb
  • “Advanced Additive Technologies in Dental Medicine”
  • “Polymers for Additive Manufacturing”
  • the National Recovery and Resilience Plan (NPOO)

Zitieren

APA

Šimunović, L., Brenko, L., Marić, A. J., Meštrović, S., & Haramina, T. (2025). Rheology of Dental Photopolymers for SLA/DLP/MSLA 3D Printing. Polymers, 17(19), 2706. https://doi.org/10.3390/polym17192706

Vancouver

Šimunović L, Brenko L, Marić AJ, Meštrović S, Haramina T. Rheology of Dental Photopolymers for SLA/DLP/MSLA 3D Printing. Polymers. 2025;17(19):2706. doi:10.3390/polym17192706

BibTeX
@article{imunovi2025,
  author = {Šimunović, Luka and Brenko, Luka and Marić, Antun Jakob and Meštrović, Senka and Haramina, Tatjana},
  title = {Rheology of Dental Photopolymers for SLA/DLP/MSLA 3D Printing},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {19},
  pages = {2706},
  doi = {10.3390/polym17192706}
}
Kostenlos starten →