EUVIMEDEUVIMED entdecken
Crossref

Circular 3D printing of high-performance photopolymers through dissociative network design

Bo Yang iD, Tiantian Ni, Jingjun Wu, Zizheng Fang iD, Kexuan Yang iD, Ben He iD, Xingqun Pu, Guancong Chen iD, Chujun Ni iD, Di Chen iD, Qian Zhao iD, Wei Li und 4 weitere

Science · 11.04.2025 · 388 (6743) · 170-175

DOI: 10.1126/science.ads3880 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Science, erschienen am 11.04.2025. Verfasst von Bo Yang und 15 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Chemical Engineering, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, China. Die Arbeit wurde bisher 119-mal zitiert (Crossref) und nennt 40 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

One approach for closed-loop plastics recycling relies on reverting polymers back into monomers because one can then make new plastics without loss of properties. This depolymerization requirement restricts the molecular design to making polymers with high mechanical performance. We report a three-dimensional (3D) printing chemistry through stepwise photopolymerization by forming dithioacetal bonds. The polymerized network can be transformed back into a photoreactive oligomer by dissociation of the dithioacetal bonds. This network-oligomer transformation is reversible, therefore allowing circular 3D printing using the same material. Our approach offers the flexibility of making modular adjustments in the design of the network backbone of a polymer. This allows access to fully recyclable elastomers, crystalline polymers, and rigid glassy polymers with high mechanical toughness, making them potentially suitable for diverse applications.

Autor:innen und Institutionen

  • State Key Laboratory of Chemical Engineering, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, China.
  • ZJU-Hangzhou Global Scientific and Technological Innovation Center, Zhejiang University, Hangzhou, China.
  • Eye Center, Affiliated Second Hospital, School of Medicine, Zhejiang University, Hangzhou, China.
  • Ningbo Innovation Center, Zhejiang University, Ningbo, China.
  • Department of Chemistry, Zhejiang University, Hangzhou, China.
  • Institute of Fundamental and Transdisciplinary Research, Zhejiang University, Hangzhou, China.

ORCID-Profile: Bo Yang, Zizheng Fang, Kexuan Yang, Ben He, Guancong Chen, Chujun Ni, Di Chen, Qian Zhao, Sujing Li, Hao Li, Ning Zheng, Tao Xie

Zitieren

APA

Yang, B., Ni, T., Wu, J., Fang, Z., Yang, K., He, B., Pu, X., Chen, G., Ni, C., Chen, D., Zhao, Q., Li, W., Li, S., Li, H., Zheng, N., & Xie, T. (2025). Circular 3D printing of high-performance photopolymers through dissociative network design. Science, 388(6743), 170-175. https://doi.org/10.1126/science.ads3880

Vancouver

Yang B, Ni T, Wu J, Fang Z, Yang K, He B, et al. Circular 3D printing of high-performance photopolymers through dissociative network design. Science. 2025;388(6743):170-175. doi:10.1126/science.ads3880

BibTeX
@article{Yang2025,
  author = {Yang, Bo and Ni, Tiantian and Wu, Jingjun and Fang, Zizheng and Yang, Kexuan and He, Ben and Pu, Xingqun and Chen, Guancong and Ni, Chujun and Chen, Di and Zhao, Qian and Li, Wei and Li, Sujing and Li, Hao and Zheng, Ning and Xie, Tao},
  title = {Circular 3D printing of high-performance photopolymers through dissociative network design},
  journal = {Science},
  year = {2025},
  volume = {388},
  number = {6743},
  pages = {170--175},
  doi = {10.1126/science.ads3880}
}
Kostenlos starten →