Parametric Finite Element Assessment of Stress Concentration and Structural Deformation in A Cylindrical Storage Tank Under Internal Pressure
IOSR Journal of Mechanical and Civil Engineering · 2026-05 · 23 (5) · 09-16
DOI: 10.9790/1684-2305010916 ↗Kurz gefasst
Fachartikel in der Zeitschrift IOSR Journal of Mechanical and Civil Engineering, 2026-05. Verfasst von M. Andri Aditya Almahesa und 1 weiteren Autor:innen.
Abstract (Originalsprache)
Storage tanks are critical components in industrial facilities because their failure can interrupt operations and generate safety and environmental consequences. This study presents a parametric assessment of the structural response of a fixed-roof cylindrical storage tank subjected to internal pressure. A three-dimensional model based on the available tank geometry was evaluated using finite-element concepts and a baseline SolidWorks 2020 result. The reference model uses ASTM A283 steel, a tank diameter of 36.46 m, a height of 11.7 m, and a baseline internal pressure of 0.08387 MPa. The reported baseline response is a maximum Von Mises stress of 74.73 MPa and a maximum displacement of 4.027 mm. To investigate pressure sensitivity, five pressure scenarios corresponding to 50%, 75%, 100%, 125%, and 150% of the baseline pressure were developed. Because the present working environment does not execute the original SolidWorks solver, the five-scenario values are explicitly treated as linear-elastic sensitivity projections calibrated to the reported baseline rather than as newly solved SolidWorks outputs. Under this assumption, stress and displacement increase proportionally with pressure, while the factor of safety decreases from approximately 6.96 at 50% pressure to 2.32 at 150% pressure. The projected stress at the highest scenario remains below the material yield strength. The analysis highlights pressure sensitivity and provides a reproducible framework for a subsequent solver-based verification. The novelty lies in reframing the single-load assessment into a pressure-parametric evaluation and integrating stress, displacement, and safety-margin indicators.
Zitieren
APA
Almahesa, M. A. A., & Chandra, H. (2026). Parametric Finite Element Assessment of Stress Concentration and Structural Deformation in A Cylindrical Storage Tank Under Internal Pressure. IOSR Journal of Mechanical and Civil Engineering, 23(5), 09-16. https://doi.org/10.9790/1684-2305010916
Vancouver
Almahesa MAA, Chandra H. Parametric Finite Element Assessment of Stress Concentration and Structural Deformation in A Cylindrical Storage Tank Under Internal Pressure. IOSR Journal of Mechanical and Civil Engineering. 2026;23(5):09-16. doi:10.9790/1684-2305010916
BibTeX
@article{Almahesa2026,
author = {Almahesa, M. Andri Aditya and Chandra, Hendri},
title = {Parametric Finite Element Assessment of Stress Concentration and Structural Deformation in A Cylindrical Storage Tank Under Internal Pressure},
journal = {IOSR Journal of Mechanical and Civil Engineering},
year = {2026},
volume = {23},
number = {5},
pages = {09--16},
doi = {10.9790/1684-2305010916}
}
EUVIMED