Structural Assessment of AISI 316L Pipes under Internal Pressure Using Analytical and Finite Element Methods
Key Engineering Materials · 12.11.2026 · 1063 · 85-94
DOI: 10.4028/p-fxbb9r ↗Kurz gefasst
Fachartikel in der Zeitschrift Key Engineering Materials, online erschienen am 12.11.2026. Verfasst von Nataliia Rott und 3 weiteren Autor:innen. Die Arbeit nennt 15 Literaturangaben.
Abstract (Originalsprache)
Corrosion-resistant pipes operating under internal pressure are critical components in chemical, energy, and petrochemical industries, where reliability and long-term performance are essential. The present study aims to provide an integrated assessment of material selection and structural performance for pipelines operating in aggressive environments. Austenitic stainless steel AISI 316L was selected based on its superior resistance to chloride-induced corrosion, good weldability, and stable mechanical properties. The required wall thickness was determined analytically using the thin-walled cylinder approach, considering operational pressure and safety factors. To validate the design, a three-dimensional finite element model was developed in Autodesk Inventor, incorporating realistic geometry, welded joints, and boundary conditions. The results show that the calculated wall thickness of 3.76 mm ensures safe operation at an internal pressure of 6 MPa. Finite element analysis revealed that the maximum equivalent stress does not exceed 128 MPa, with a minimum safety factor of 1.56. The maximum displacement was found to be less than 0.1 mm, indicating high structural stiffness and stability. Stress concentrations were localized in geometrically complex regions; however, they remained within allowable limits. The novelty of the study lies in the combined application of analytical and numerical approaches for the validation of pipe design under combined mechanical and environmental loading. The proposed methodology provides a reliable framework for the design and optimization of corrosion-resistant pipelines, ensuring safety, durability, and cost-effectiveness in aggressive operating conditions.
Zitieren
APA
Rott, N., Sazanishvili, Z., Tverdokhlib, O., & Tsymbal, B. (2026). Structural Assessment of AISI 316L Pipes under Internal Pressure Using Analytical and Finite Element Methods. Key Engineering Materials, 1063, 85-94. https://doi.org/10.4028/p-fxbb9r
Vancouver
Rott N, Sazanishvili Z, Tverdokhlib O, Tsymbal B. Structural Assessment of AISI 316L Pipes under Internal Pressure Using Analytical and Finite Element Methods. Key Engineering Materials. 2026;1063:85-94. doi:10.4028/p-fxbb9r
BibTeX
@article{Rott2026,
author = {Rott, Nataliia and Sazanishvili, Zoia and Tverdokhlib, Olexandr and Tsymbal, Bohdan},
title = {Structural Assessment of AISI 316L Pipes under Internal Pressure Using Analytical and Finite Element Methods},
journal = {Key Engineering Materials},
year = {2026},
volume = {1063},
pages = {85--94},
doi = {10.4028/p-fxbb9r}
}
EUVIMED