EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Finite-Element Method for Elastic Stress Inversion from Wellbore Deformation

Di Wang, Yang Li, Kunpeng Zhang, Xi Hu, Jianqiang Sun

Applied Sciences · 17.11.2026 · 16 (22) · 11395

DOI: 10.3390/app162211395 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 17.11.2026. Verfasst von Di Wang und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Major Special Project of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Errors in in situ stresses narrow the mud-weight window and compromise wellbore stability and hydraulic fracture containment, yet σH remains the most poorly constrained stress component. Wellbore deformation relative to a known reference configuration can constrain the stresses, but conventional caliper and image logs measure borehole shape rather than the material displacement field required by the inversion; analytical inversion based on the Kirsch solution assumes a circular borehole in a homogeneous elastic medium. Finite element modeling offers a route beyond this restriction, but gradient-free optimizers require thousands of forward solves. We present INSIDE (IN Situ stress Inversion from wellbore DEformation), which couples a GPU-accelerated finite element forward model with L-BFGS-B optimization to recover the far-field stresses σH and σh from wellbore wall deformation. While the problem has only two unknowns and each finite-difference gradient requires only three forward solves, the iterative workflow is deliberately retained as a general nonlinear inversion path for stress-dependent constitutive models. The forward model reproduces the Kirsch solution with wall-displacement errors below 0.24%, while noise-free twin experiments recover both stresses with relative errors below 0.01%. Monte Carlo ensembles of 100 seeds per noise level give mean stress errors of 1.60% (σH) and 2.18% (σh) at 20% noise, converging within 4–6 iterations regardless of initial guess. Young’s modulus is the dominant error channel, with stress errors scaling nearly one-to-one with modulus uncertainty. This study deliberately focuses on a pure-elastic baseline in a circular, homogeneous, and isotropic medium. Extending this framework to non-circular geometries, heterogeneous media, and elastoplastic behavior represents the primary direction for future work.

Förderung

  • National Major Special Project of China

Zitieren

APA

Wang, D., Li, Y., Zhang, K., Hu, X., & Sun, J. (2026). A Finite-Element Method for Elastic Stress Inversion from Wellbore Deformation. Applied Sciences, 16(22), 11395. https://doi.org/10.3390/app162211395

Vancouver

Wang D, Li Y, Zhang K, Hu X, Sun J. A Finite-Element Method for Elastic Stress Inversion from Wellbore Deformation. Applied Sciences. 2026;16(22):11395. doi:10.3390/app162211395

BibTeX
@article{Wang2026,
  author = {Wang, Di and Li, Yang and Zhang, Kunpeng and Hu, Xi and Sun, Jianqiang},
  title = {A Finite-Element Method for Elastic Stress Inversion from Wellbore Deformation},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {22},
  pages = {11395},
  doi = {10.3390/app162211395}
}
Kostenlos starten →