EUVIMEDEUVIMED entdecken
Crossref

Evaluation And Comparison Of Flexural Strength Of CAD/CAM Milled And Conventional Provisional Pmma Materials: An Invitro Study

Dr. Mandava Divya Sree, Dr. Kasina Sitaram Prasad, Dr. Yarlagadda Siva Kiran Babu, Dr. Chatarasupalli Durga Ajay Teja

IOSR Journal of Dental and Medical Sciences · 2026-05 · 25 (5) · 66-70

DOI: 10.9790/0853-2505026670 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IOSR Journal of Dental and Medical Sciences, 2026-05. Verfasst von Dr. Mandava Divya Sree und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Provisional restorative materials must possess adequate mechanical properties to withstand functional stresses during temporization. With the advent of CAD/CAM technology, pre-polymerized PMMA materials have been introduced, offering improved strength and reliability compared with conventional resins. However, limited evidence exists regarding differences in flexural strength among commercially available CAD/CAM-milled PMMA materials. Materials and Methods: A total of 60 specimens were fabricated and divided into three groups (n=20). Group A consisted of conventional self-polymerizing provisional PMMA (DPI). Group B and Group C consisted of CAD/CAM-milled provisional PMMA specimens fabricated from DELTA and UPCERA blocks, respectively. All specimens were prepared according to standardized dimensions. Flexural strength was evaluated using a threepoint bending test in a universal testing machine. The data obtained were statistically analyzed using one-way ANOVA and post hoc tests.

Results

The mean flexural strength values were 26.88 ± 7.00 MPa for Group A, 91.69 ± 11.42 MPa for Group B (DELTA), and 113.83 ± 15.01 MPa for Group C (UPCERA). CAD/CAM-milled PMMA materials showed significantly higher flexural strength compared to conventional PMMA (P

Zitieren

APA

Sree, D. M. D., Prasad, D. K. S., Babu, D. Y. S. K., & Teja, D. C. D. A. (2026). Evaluation And Comparison Of Flexural Strength Of CAD/CAM Milled And Conventional Provisional Pmma Materials: An Invitro Study. IOSR Journal of Dental and Medical Sciences, 25(5), 66-70. https://doi.org/10.9790/0853-2505026670

Vancouver

Sree DMD, Prasad DKS, Babu DYSK, Teja DCDA. Evaluation And Comparison Of Flexural Strength Of CAD/CAM Milled And Conventional Provisional Pmma Materials: An Invitro Study. IOSR Journal of Dental and Medical Sciences. 2026;25(5):66-70. doi:10.9790/0853-2505026670

BibTeX
@article{Sree2026,
  author = {Sree, Dr. Mandava Divya and Prasad, Dr. Kasina Sitaram and Babu, Dr. Yarlagadda Siva Kiran and Teja, Dr. Chatarasupalli Durga Ajay},
  title = {Evaluation And Comparison Of Flexural Strength Of CAD/CAM Milled And Conventional Provisional Pmma Materials: An Invitro Study},
  journal = {IOSR Journal of Dental and Medical Sciences},
  year = {2026},
  volume = {25},
  number = {5},
  pages = {66--70},
  doi = {10.9790/0853-2505026670}
}
Kostenlos starten →