EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 3.0

Experimental Study on Porosity Behavior during DED Additive Manufacturing of S45C/H13 Dissimilar Metals

Si Heon Lee, Ha Jin Choi, Min Woo Yeon, Hyun Na Kim, Sae Hun Jeong, Chul Kyu Jin, Do Young Kim

Journal of the Korean Society for Precision Engineering · 01.03.2026 · 43 (3) · 231-236

DOI: 10.7736/jkspe.025.00027 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the Korean Society for Precision Engineering, erschienen am 01.03.2026. Verfasst von Si Heon Lee und 6 weiteren Autor:innen. Die Arbeit nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 3.0). Gefördert von: Ministry of Trade, Industry and Resources, Korea Institute for Advancement of Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study examines the porosity behavior during the directed energy deposition (DED) of dissimilar metals S45C and H13. We analyzed the effects of deposition parameters, including laser power, feed rate, and powder characteristics, on pore formation, taking into account the unique properties of these metals. Our findings indicate that laser power is the primary factor influencing porosity. At a low power of 200 W, insufficient energy input, along with differences in thermal conductivity and chemical composition between S45C and H13, led to incomplete melting and lack-of-fusion, resulting in high porosity. As the laser power increased to 400-600 W, the melt pool stabilized, enhancing interfacial bonding and significantly reducing porosity. However, at an excessive power of 800 W, rapid melting and solidification of the powder caused gas entrapment and pore formation, which increased porosity, particularly due to the differing thermal conductivities of S45C and H13. Therefore, our results suggest that maintaining an adequate laser power of 400-600 W is essential for achieving a stable melt pool and minimizing porosity in the DED process for dissimilar S45C and H13 metals.

Förderung

  • Ministry of Trade, Industry and Resources
  • Korea Institute for Advancement of Technology

Zitieren

APA

Lee, S. H., Choi, H. J., Yeon, M. W., Kim, H. N., Jeong, S. H., Jin, C. K., & Kim, D. Y. (2026). Experimental Study on Porosity Behavior during DED Additive Manufacturing of S45C/H13 Dissimilar Metals. Journal of the Korean Society for Precision Engineering, 43(3), 231-236. https://doi.org/10.7736/jkspe.025.00027

Vancouver

Lee SH, Choi HJ, Yeon MW, Kim HN, Jeong SH, Jin CK, et al. Experimental Study on Porosity Behavior during DED Additive Manufacturing of S45C/H13 Dissimilar Metals. Journal of the Korean Society for Precision Engineering. 2026;43(3):231-236. doi:10.7736/jkspe.025.00027

BibTeX
@article{Lee2026,
  author = {Lee, Si Heon and Choi, Ha Jin and Yeon, Min Woo and Kim, Hyun Na and Jeong, Sae Hun and Jin, Chul Kyu and Kim, Do Young},
  title = {Experimental Study on Porosity Behavior during DED Additive Manufacturing of S45C/H13 Dissimilar Metals},
  journal = {Journal of the Korean Society for Precision Engineering},
  year = {2026},
  volume = {43},
  number = {3},
  pages = {231--236},
  doi = {10.7736/jkspe.025.00027}
}
Kostenlos starten →