Comparative Study of Different Additive Manufacturing Methods for H13 Tool Steel
Materials · 24.11.2025 · 18 (23) · 5299
DOI: 10.3390/ma18235299 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 24.11.2025. Verfasst von Paweł Widomski und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Metal Forming, Welding and Metrology, Faculty of Mechanical Engineering, Wroclaw University of Science and Technology, 50-371 Wrocław, …. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Centre for Research and Development.
Abstract (Originalsprache)
Additive manufacturing (AM) of hot-work tool steels such as H13 offers unique opportunities for producing complex, conformally cooled tools with reduced production time and material waste. In this study, five metal AM technologies—Fused Deposition Modeling and Sintering (FDMS, Desktop Metal Studio System and Zetamix), Binder Jetting (BJ), Laser Powder Bed Fusion (LPBF), and Directed Energy Deposition (DED)—were compared in terms of microstructure, porosity, and post-processing heat treatment response. The as-printed microstructures revealed distinct differences among the technologies: FDMS and BJ exhibited high porosity (6–9%), whereas LPBF and DED achieved near-full densification (
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Metal Forming, Welding and Metrology, Faculty of Mechanical Engineering, Wroclaw University of Science and Technology, 50-371 Wrocław, Poland.
- Department of Analytical Chemistry and Chemical Metallurgy, Faculty of Chemistry, Wroclaw University of Science and Technology, 50-371 Wrocław, Poland.
ORCID-Profile: Paweł Widomski, Daniel Dobras, Dominik Terefinko, Michał Kołodziński
Förderung
- National Centre for Research and Development
Zitieren
APA
Widomski, P., Kaszuba, M., Dobras, D., Terefinko, D., & Kołodziński, M. (2025). Comparative Study of Different Additive Manufacturing Methods for H13 Tool Steel. Materials, 18(23), 5299. https://doi.org/10.3390/ma18235299
Vancouver
Widomski P, Kaszuba M, Dobras D, Terefinko D, Kołodziński M. Comparative Study of Different Additive Manufacturing Methods for H13 Tool Steel. Materials. 2025;18(23):5299. doi:10.3390/ma18235299
BibTeX
@article{Widomski2025,
author = {Widomski, Paweł and Kaszuba, Marcin and Dobras, Daniel and Terefinko, Dominik and Kołodziński, Michał},
title = {Comparative Study of Different Additive Manufacturing Methods for H13 Tool Steel},
journal = {Materials},
year = {2025},
volume = {18},
number = {23},
pages = {5299},
doi = {10.3390/ma18235299}
}
EUVIMED