EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Research on Ultrasonic Vibration Amplitudes in Ti6Al4V DED Additive Manufacturing

Wei Liu, Zhenchao Zhang, Suli Li, Chao Xu

Alloys · 19.10.2023 · 2 (4) · 256-270

DOI: 10.3390/alloys2040018 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Alloys, online erschienen am 19.10.2023. Verfasst von Wei Liu und 3 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 14 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shaanxi Provincial Education Science “14th Five-Year Plan” 2022 project, Shaanxi Province Qin Chuangyuan “scientist + Engineer” team construction project, 2022 Qin Chuangyuan Achievement Transformation Incubation Capacity Improvement Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ultrasonic-assisted Ti6Al4V Directed Energy Deposition (DED) additive manufacturing technology can improve the problem of uneven microstructure caused by laser heating and sudden cooling of the molten pool. In this paper, the numerical analysis and experimental verification methods were adopted. The influencing factors, such as the cavitations’ effect, sound flow enhancement effect, and sound flow thermal effect related to the ultrasonic assistance in the molten pool, were analyzed. After equating the energy of the ultrasound, the model of additive manufacturing was introduced in the form of a heat source. The temperature gradient changes during the solidification process of the molten pool with the addition of ultrasound assistance and the effect of ultrasonic vibration during the manufacturing process on its deposited state and microstructure of solution-aged formed parts were studied. The results showed that when the wire feeding rate is 5 mm/s and the laser scanning speed is 5 mm/s, the optimal laser power is 1000 W~1100 W, corresponding to the optimal ultrasonic amplitude of 120 μm. Then, by comparing the temperature field with the same amplitude of 0 μm (i.e., no ultrasonic vibration) and the microstructure of the formed parts, it was verified that ultrasonic vibration facilitates fluid flow in the molten pool, which could lead to a more uniform temperature distribution. This optimized approach not only enhances the understanding of the process but also contributes significantly to the advancement of related research endeavors.

Förderung

  • Shaanxi Provincial Education Science “14th Five-Year Plan” 2022 project
  • Shaanxi Province Qin Chuangyuan “scientist + Engineer” team construction project
  • 2022 Qin Chuangyuan Achievement Transformation Incubation Capacity Improvement Project
  • Shaanxi Vocational Education Rural Revitalization Research Institute 2022 Annual Research project
  • 2023 Scientific Research Project of Shaanxi National Defense Industry Vocational and Technical College
  • Shaanxi Province key research and Development Plan—“Two chains” integration key project—Qin Chuangyuan General Window Industrial Cluster project

Zitieren

APA

Liu, W., Zhang, Z., Li, S., & Xu, C. (2023). The Research on Ultrasonic Vibration Amplitudes in Ti6Al4V DED Additive Manufacturing. Alloys, 2(4), 256-270. https://doi.org/10.3390/alloys2040018

Vancouver

Liu W, Zhang Z, Li S, Xu C. The Research on Ultrasonic Vibration Amplitudes in Ti6Al4V DED Additive Manufacturing. Alloys. 2023;2(4):256-270. doi:10.3390/alloys2040018

BibTeX
@article{Liu2023,
  author = {Liu, Wei and Zhang, Zhenchao and Li, Suli and Xu, Chao},
  title = {The Research on Ultrasonic Vibration Amplitudes in Ti6Al4V DED Additive Manufacturing},
  journal = {Alloys},
  year = {2023},
  volume = {2},
  number = {4},
  pages = {256--270},
  doi = {10.3390/alloys2040018}
}
Kostenlos starten →