EUVIMEDEUVIMED entdecken
Crossref

Influence of Polymerization Mechanism on Surface Roughness, Microhardness, and Polymerization Efficiency of Bulk-Fill Resin Composites

Esra Yıldırım Manav, Feridun Hürmüzlü

Cumhuriyet Dental Journal · 01.07.2026 · 29 (2) · 350-355

DOI: 10.7126/cumudj.1873554 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Cumhuriyet Dental Journal, online erschienen am 01.07.2026. Verfasst von Esra Yıldırım Manav und 1 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objective

To investigate how polymerization mechanism influences surface roughness, microhardness, and curing homogeneity of bulk-fill resin composites. Materials and Methods: Two light-cure bulk-fill composites (Estelite Bulk Fill Flow, VisCalor Bulk) and two self-cure bulk-fill composites (Stela Automix, Stela Capsule) were evaluated (n = 12 per material). Cylindrical specimens (6 mm diameter × 4 mm thickness) were fabricated. Surface roughness (Ra) was measured using contact profilometry. Vickers microhardness (VHN) was determined on both top and bottom surfaces. Curing homogeneity was assessed using the bottom-to-top hardness ratio. Data were analyzed using two-way ANOVA and Tukey post hoc tests (α = 0.05).

Results

Self-cure composites demonstrated significantly higher surface roughness than light-cure materials (p < 0.001). Light-cure composites showed significantly greater top and bottom surface microhardness (p < 0.001). However, light-cure materials exhibited a significant reduction in hardness at the bottom surface, resulting in lower hardness ratios (0.83–0.85). In contrast, self-cure materials showed no significant top–bottom difference and presented significantly higher hardness ratios (0.95–0.96; p < 0.001).

Conclusions

The polymerization mechanism appears to influence the surface characteristics and curing behavior of bulk-fill resin composites. Light-cured materials tended to exhibit higher hardness values, whereas chemically cured materials demonstrated a more uniform polymerization profile throughout the material thickness. These findings suggest that the type of polymerization may be a factor worth considering during material selection, particularly in deep restorations where light transmission may be limited.

Zitieren

APA

Manav, E. Y., & Hürmüzlü, F. (2026). Influence of Polymerization Mechanism on Surface Roughness, Microhardness, and Polymerization Efficiency of Bulk-Fill Resin Composites. Cumhuriyet Dental Journal, 29(2), 350-355. https://doi.org/10.7126/cumudj.1873554

Vancouver

Manav EY, Hürmüzlü F. Influence of Polymerization Mechanism on Surface Roughness, Microhardness, and Polymerization Efficiency of Bulk-Fill Resin Composites. Cumhuriyet Dental Journal. 2026;29(2):350-355. doi:10.7126/cumudj.1873554

BibTeX
@article{Manav2026,
  author = {Manav, Esra Yıldırım and Hürmüzlü, Feridun},
  title = {Influence of Polymerization Mechanism on Surface Roughness, Microhardness, and Polymerization Efficiency of Bulk-Fill Resin Composites},
  journal = {Cumhuriyet Dental Journal},
  year = {2026},
  volume = {29},
  number = {2},
  pages = {350--355},
  doi = {10.7126/cumudj.1873554}
}
Kostenlos starten →