Design of a Mini Injection Molding Machine and Injection Analysis of Products Using CAE Software
International Journal of Mechanical Engineering Science and Technology · 29.05.2026 · 1 (1) · 28-40
DOI: 10.67795/ijomest.v1i1.17 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Mechanical Engineering Science and Technology, online erschienen am 29.05.2026. Verfasst von Nurul Dwi Rahma und 3 weiteren Autor:innen. Die Arbeit nennt 15 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The increasing amount of HDPE (High-Density Polyethylene) plastic waste requires more efficient and economical processing technologies, particularly for small-and medium-scale applications. This study aims to design a mini injection molding machine for processing HDPE plastic waste and to analyze the product injection process using Computer-Aided Engineering (CAE)-based software. The machine was designed using SolidWorks, focusing on the injection system, clamping system, and heating system. The injection process was analyzed using SolidWorks Plastics with variations in gate position and melt temperature to evaluate injection pressure, material flow distribution, and product defects. The results show that the designed machine is capable of producing a stable HDPE injection process using a screw with an L/D ratio of 20:1 and a ball screw-based clamping system. Simulation results indicate that a gate position located at the center of the product provides the best flow distribution with minimal weldline defects. The optimum melt temperature was found to be 240°C, with an injection pressure of approximately 10 MPa. These findings indicate that the integration of mini injection molding technology and CAE-based analysis has the potential to support more efficient plastic recycling processes while minimizing design revisions, material waste, and manufacturing costs in small-scale production systems
Zitieren
APA
Rahma, N. D., Zamri, A., Mulyadi, M., & Yuliarman, Y. (2026). Design of a Mini Injection Molding Machine and Injection Analysis of Products Using CAE Software. International Journal of Mechanical Engineering Science and Technology, 1(1), 28-40. https://doi.org/10.67795/ijomest.v1i1.17
Vancouver
Rahma ND, Zamri A, Mulyadi M, Yuliarman Y. Design of a Mini Injection Molding Machine and Injection Analysis of Products Using CAE Software. International Journal of Mechanical Engineering Science and Technology. 2026;1(1):28-40. doi:10.67795/ijomest.v1i1.17
BibTeX
@article{Rahma2026,
author = {Rahma, Nurul Dwi and Zamri, Aidil and Mulyadi, Mulyadi and Yuliarman, Yuliarman},
title = {Design of a Mini Injection Molding Machine and Injection Analysis of Products Using CAE Software},
journal = {International Journal of Mechanical Engineering Science and Technology},
year = {2026},
volume = {1},
number = {1},
pages = {28--40},
doi = {10.67795/ijomest.v1i1.17}
}
EUVIMED