EUVIMEDEUVIMED entdecken
Crossref

Optimize Injection Molding with Moldflow Software to Improve Moving Parts Manufacturing

Senlin Chen, Bin Xu

Journal of Advanced Manufacturing Systems · 23.05.2026 · 1-25

DOI: 10.1142/s0219686728500023 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Advanced Manufacturing Systems, online erschienen am 23.05.2026. Verfasst von Senlin Chen und 1 weiteren Autor:innen. Gefördert von: Research on Reverse Engineering of Plastic Mold Forming Parts, Mechanical Design and Manufacturing Professional Teaching Innovation Team.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Based on Autodesk Moldflow software, this paper studies the system simulation and process optimization of injection molding process of typical moving parts by constructing a closed-loop “design-simulation-feedback-optimization-verification” model. The results show that the introduction of Moldflow significantly improves the manufacturing accuracy and efficiency. In terms of parameter optimization, through automated script and gradient descent algorithm, multi-round iterative analysis of key parameters such as melt temperature, mold temperature and filling speed was realized, and the optimal combination was screened out, which reduced the length of the welding line to 6.8 mm and stabilized the filling pressure at 101.3 MPa. After optimization, the maximum value of warping deformation is reduced from 0.85 mm to 0.49 mm, a decrease of 42.35%; The shrinkage grade decreased from grades 3 to 2, and the improvement rate reached 33.33%; The molding cycle was shortened from 28.5 s to 24.0 s, and the efficiency was improved by 15.79%; The yield rate increased from 87% to 96%, and the overall manufacturing stability was significantly enhanced. In terms of the cooling system, by redesigning the waterway structure and simulating the temperature field, the mold temperature difference is reduced to 8.9[Formula: see text]C, and the cooling time difference is controlled within 2.1 s, effectively reducing thermal stress concentration and dimensional deformation. The final energy consumption analysis shows that the energy consumption of the optimized scheme is reduced by 32.9%, and the energy saving effect is remarkable. To sum up, Moldflow software, in conjunction with automatic optimization process, provides strong data support and decision-making basis for high-quality manufacturing of injection molding moving parts, and has a wide engineering application prospect.

Förderung

  • Research on Reverse Engineering of Plastic Mold Forming Parts
  • Mechanical Design and Manufacturing Professional Teaching Innovation Team

Zitieren

APA

Chen, S., & Xu, B. (2026). Optimize Injection Molding with Moldflow Software to Improve Moving Parts Manufacturing. Journal of Advanced Manufacturing Systems, 1-25. https://doi.org/10.1142/s0219686728500023

Vancouver

Chen S, Xu B. Optimize Injection Molding with Moldflow Software to Improve Moving Parts Manufacturing. Journal of Advanced Manufacturing Systems. 2026:1-25. doi:10.1142/s0219686728500023

BibTeX
@article{Chen2026,
  author = {Chen, Senlin and Xu, Bin},
  title = {Optimize Injection Molding with Moldflow Software to Improve Moving Parts Manufacturing},
  journal = {Journal of Advanced Manufacturing Systems},
  year = {2026},
  pages = {1--25},
  doi = {10.1142/s0219686728500023}
}
Kostenlos starten →