EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Machine Learning-Based Process Control for Injection Molding of Recycled Polypropylene

Joshua Krantz, Juliana Licata, Muntaqim Ahmed Raju, Peng Gao, Ruizhe Ma iD, Davide Masato iD

Polymers · 30.03.2025 · 17 (7) · 940

DOI: 10.3390/polym17070940 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 30.03.2025. Verfasst von Joshua Krantz und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Plastics Engineering, University of Massachusetts Lowell, Lowell, MA 01854, USA. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: United States Department of Energy, U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy (EERE).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increased interest in artificial intelligence in manufacturing has driven the adoption of machine learning to optimize processes and improve efficiency. A key challenge in injection molding is the variability of recycled materials, which affects part quality and processing stability. This study presents a novel closed-loop process control approach for injection molding, leveraging machine learning to adaptively predict processing inputs and quality outcomes. The methodology was tested on five blends of recycled polypropylene (rPP), using artificial neural networks (ANNs), linear regression, and polynomial regression to model the relationships between material properties and process parameters. The dataset was split 80/20 into training and testing sets. The ANN model was implemented using TensorFlow and Keras, with six hidden layers of 32 neurons per layer, ReLU activation, and an Adam optimizer. Empirical tuning and early stopping were used to optimize performance and prevent overfitting. Predictions were evaluated based on mean absolute error (MAE), mean squared error (MSE), and percentage error. The results showed that yield stress, ultimate elongation, and part weight were accurately predicted within a 5% error for linear and polynomial regression models and within a 10% error for the ANN. However, modulus predictions were less reliable, with errors of ~11% for ANN and linear regression and ~40% for polynomial regression, reflecting the inherent variability of this property in rPP blends. Predictions of processing inputs had errors ranging from 3% to 25%, depending on the model and response variable. No single modeling approach was consistently superior across all responses, highlighting the complexity of the relationship between material properties, process parameters, and quality metrics. Overall, the work demonstrates that closed-loop process control, powered by machine learning, can effectively predict key quality parameters in injection molding of recycled materials. The proposed approach can improve process stability and material utilization, facilitating increased adoption of sustainable materials.

Schlagwörter

Stichwörter der Autor:innen

injection moldingmachine learningprocess controlrecycled polypropylene

Autor:innen und Institutionen

  • Department of Plastics Engineering, University of Massachusetts Lowell, Lowell, MA 01854, USA.
  • Department of Computer and Information Sciences, University of Massachusetts Lowell, Lowell, MA 01854, USA.
  • Department of Engineering and Design, Western Washington University, Bellingham, WA 98225, USA.

ORCID-Profile: Ruizhe Ma, Davide Masato

Förderung

  • United States Department of Energy
  • U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy (EERE)

Zitieren

APA

Krantz, J., Licata, J., Raju, M. A., Gao, P., Ma, R., & Masato, D. (2025). Machine Learning-Based Process Control for Injection Molding of Recycled Polypropylene. Polymers, 17(7), 940. https://doi.org/10.3390/polym17070940

Vancouver

Krantz J, Licata J, Raju MA, Gao P, Ma R, Masato D. Machine Learning-Based Process Control for Injection Molding of Recycled Polypropylene. Polymers. 2025;17(7):940. doi:10.3390/polym17070940

BibTeX
@article{Krantz2025,
  author = {Krantz, Joshua and Licata, Juliana and Raju, Muntaqim Ahmed and Gao, Peng and Ma, Ruizhe and Masato, Davide},
  title = {Machine Learning-Based Process Control for Injection Molding of Recycled Polypropylene},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {7},
  pages = {940},
  doi = {10.3390/polym17070940}
}
Kostenlos starten →