INVESTIGATION OF THE EFFECT OF UNSM TREATMENT MODES ON THE STRUCTURAL AND MECHANICAL PROPERTIES OF THE SURFACE LAYER OF 45 STEEL
Journal of Surface Engineering and Coating Technology · 24.06.2026 · 83
DOI: 10.66310/pnid9854 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Surface Engineering and Coating Technology, online erschienen am 24.06.2026. Verfasst von Moldir Kaliaskarova und 4 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of the Republic of Kazakhstan.
Abstract (Originalsprache)
This study investigates the effect of Ultrasonic Nanocrystal Surface Modification (UNSM) treatment on the microstructure, hardness, roughness, and tribological characteristics of 45 steel. The treatment was carried out under static loads of 20, 40, and 60 N. Microstructural analysis was performed using scanning electron microscopy. Mechanical properties were evaluated by instrumental indentation and Vickers hardness methods. It was established that UNSM treatment promotes the formation of a hardened surface layer and grain refinement due to severe plasticdeformation. The maximum instrumental hardness value, HIT, reached 5722.4 N/mm² at a load of 40 N. At the same time, a decrease in surface roughness and friction coefficient was observed. The obtained results demonstrate the high efficiency of UNSM treatment for improving the performance properties of 45 steel.
Förderung
- Ministry of Science and Higher Education of the Republic of Kazakhstan
Zitieren
APA
Kaliaskarova, M., Magazov, N., Yakushina, E., Aringozhina, Z., & Bayatanova, L. (2026). INVESTIGATION OF THE EFFECT OF UNSM TREATMENT MODES ON THE STRUCTURAL AND MECHANICAL PROPERTIES OF THE SURFACE LAYER OF 45 STEEL. Journal of Surface Engineering and Coating Technology, 83. https://doi.org/10.66310/pnid9854
Vancouver
Kaliaskarova M, Magazov N, Yakushina E, Aringozhina Z, Bayatanova L. INVESTIGATION OF THE EFFECT OF UNSM TREATMENT MODES ON THE STRUCTURAL AND MECHANICAL PROPERTIES OF THE SURFACE LAYER OF 45 STEEL. Journal of Surface Engineering and Coating Technology. 2026:83. doi:10.66310/pnid9854
BibTeX
@article{Kaliaskarova2026,
author = {Kaliaskarova, Moldir and Magazov, Nurtoleu and Yakushina, Evgeniya and Aringozhina, Zarina and Bayatanova, Lyaila},
title = {INVESTIGATION OF THE EFFECT OF UNSM TREATMENT MODES ON THE STRUCTURAL AND MECHANICAL PROPERTIES OF THE SURFACE LAYER OF 45 STEEL},
journal = {Journal of Surface Engineering and Coating Technology},
year = {2026},
pages = {83},
doi = {10.66310/pnid9854}
}
EUVIMED