EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Surface Roughness on the Properties of Nitrided Layer on 42CrMo4 Steel

Marcin Moneta iD, Jerzy Stodolny, Beata Michalkiewicz iD, Rafał Jan Wróbel iD

Materials · 21.06.2023 · 16 (13) · 4496

DOI: 10.3390/ma16134496 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 21.06.2023. Verfasst von Marcin Moneta und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Technology and Engineering, West Pomeranian University of Technology, Szczecin, ul. Pułaskiego 10, 70-322 Szczecin, Poland. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Polish Ministry of Education and Science, Ministry of Education and Science.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A crucial factor of a nitriding process of treated parts is surface roughness. Eight samples of 42CrMo4 steel were used to investigate the parameter represented by Ra. In the study, the innovative combined microhardness profiles were used to present results within the compound zone and diffusion layer. Therefore, two loads were applied in the compound zone, 5 gf, and diffusion layer, 500 gf. Observation with SEM and chemical analysis of the investigated samples showed a correlation between microstructure, nitrogen concentration and microhardness of the compound zone. XRD diffraction was used to identify the phase composition. Moreover, the X-ray photoelectron spectroscopy technique was also applied in the study. No distinct correlations between compound zone morphology and the Ra parameter were observed. The thickness value of the structure was constant and fluctuated around 20 µm in the vast majority of the examined cases. However, analysis of the results revealed a dependence between the Ra parameter and diffusion layer thickness. The values of this parameter varied in the range of 356–394 µm depending on the Ra parameter. A distinct nitrided layer was observed on the polished sample.

Schlagwörter

Stichwörter der Autor:innen

materials engineeringnitridingroughnesssurfacethermochemical treatment

Autor:innen und Institutionen

  • Department of Chemical Technology and Engineering, West Pomeranian University of Technology, Szczecin, ul. Pułaskiego 10, 70-322 Szczecin, Poland.
  • Elterma S.A. S.K.A., ul. Poznańska 58, 66-200 Świebodzin, Poland.
  • Independent Researcher, ul. Pisza 27, 32-700 Bochnia, Poland.

ORCID-Profile: Marcin Moneta, Beata Michalkiewicz, Rafał Jan Wróbel

Förderung

  • Polish Ministry of Education and Science
  • Ministry of Education and Science

Zitieren

APA

Moneta, M., Stodolny, J., Michalkiewicz, B., & Wróbel, R. J. (2023). Influence of Surface Roughness on the Properties of Nitrided Layer on 42CrMo4 Steel. Materials, 16(13), 4496. https://doi.org/10.3390/ma16134496

Vancouver

Moneta M, Stodolny J, Michalkiewicz B, Wróbel RJ. Influence of Surface Roughness on the Properties of Nitrided Layer on 42CrMo4 Steel. Materials. 2023;16(13):4496. doi:10.3390/ma16134496

BibTeX
@article{Moneta2023,
  author = {Moneta, Marcin and Stodolny, Jerzy and Michalkiewicz, Beata and Wróbel, Rafał Jan},
  title = {Influence of Surface Roughness on the Properties of Nitrided Layer on 42CrMo4 Steel},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {13},
  pages = {4496},
  doi = {10.3390/ma16134496}
}
Kostenlos starten →