Low-Temperature Fatigue Behavior of Modified Asphalt Mixtures Using Dynamic SCB Testing
Construction Systems & Infrastructure · 23.05.2026 · 2 (1)
DOI: 10.65782/csin.24 ↗Kurz gefasst
Fachartikel in der Zeitschrift Construction Systems & Infrastructure, online erschienen am 23.05.2026. Verfasst von Hakan. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Fatigue cracking is one of the most critical distress mechanisms affecting asphalt pavements subjected to repeated traffic loading, particularly under low-temperature conditions where brittle fracture behavior becomes dominant. In this study, the fatigue and fracture performance of modified asphalt mixtures was experimentally investigated using a dynamic semi-circular bending (SCB) test framework conducted at −20 °C. SCB specimens containing notch depths of 1 cm were prepared to evaluate the influence of initial crack geometry on crack initiation and propagation behavior under cyclic loading conditions. Within the experimental program, different modifier systems were incorporated into asphalt mixtures, including SBS, Enprene 611, and Enprene 701 at 2%, 3%, and 4% contents, crumb rubber (CR) at 4%, 6%, and 8% contents, and Elvaloy (3%) combined with 0.2% polyphosphoric acid (PPA). Dynamic SCB experiments were performed under repeated sinusoidal loading, and the load–CMOD responses were continuously monitored to evaluate deformation accumulation, crack propagation characteristics, and fatigue life behavior. The results demonstrated that all modifier systems significantly improved the fatigue resistance of asphalt mixtures compared with the control mixture under severe low-temperature conditions. Among all mixtures, the Enprene 611 series exhibited the best overall performance, particularly at the 4% dosage level, which provided the highest fatigue life and the lowest deformation accumulation. SBS-modified mixtures also demonstrated remarkable resistance against cyclic fracture damage, whereas Enprene 701, CR, and Elvaloy+PPA systems provided comparatively moderate improvements. The findings indicate that polymer- and rubber-based modifiers considerably delay crack propagation and improve the cyclic fracture resistance of asphalt mixtures under low-temperature repeated loading conditions. Furthermore, the proposed dynamic SCB framework provides an effective and practical methodology for evaluating fatigue-related fracture behavior of modified asphalt mixtures.
Zitieren
APA
Hakan (2026). Low-Temperature Fatigue Behavior of Modified Asphalt Mixtures Using Dynamic SCB Testing. Construction Systems & Infrastructure, 2(1). https://doi.org/10.65782/csin.24
Vancouver
Hakan. Low-Temperature Fatigue Behavior of Modified Asphalt Mixtures Using Dynamic SCB Testing. Construction Systems & Infrastructure. 2026;2(1). doi:10.65782/csin.24
BibTeX
@article{Hakan2026,
author = {Hakan},
title = {Low-Temperature Fatigue Behavior of Modified Asphalt Mixtures Using Dynamic SCB Testing},
journal = {Construction Systems & Infrastructure},
year = {2026},
volume = {2},
number = {1},
doi = {10.65782/csin.24}
}
EUVIMED