Exploring the low-temperature performance of MPP-modified asphalt binders and mixtures using wet method
Canadian Journal of Civil Engineering · 01.05.2024 · 51 (5) · 489-507
DOI: 10.1139/cjce-2023-0306 ↗Kurz gefasst
Fachartikel in der Zeitschrift Canadian Journal of Civil Engineering, erschienen am 01.05.2024. Verfasst von Ali Qabur und 2 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada, ALLRP, Peel Plastic Products Ltd..
Abstract (Originalsprache)
Thermal cracking significantly impacts the structural integrity of flexible pavements, particularly in colder regions like Canada. Limited studies investigated the impact of plastic modification of asphalt binders and mixtures using the wet method on the low-temperature performance of asphalt materials. The plastic material utilized in this project is multilayer plastic packaging (MPP). This study aims to determine whether MPP can be integrated to enhance the performance of the MPP-modified binder and MPP-modified mixtures, especially considering that MPP accounts for just over 40% of total plastic usage, making it the largest end-use market segment. This research evaluates the impact on rheological and mechanical behaviour when introducing MPP additives to conventional hot mix asphalt. This study used the wet method to test MPP-modified asphalt materials at 2%, 4%, and 8% (by weight of the asphalt binder). Test results demonstrate that the MPP modification percentage should ideally not exceed 2% as blends with 4% MPP or higher exhibited lower performance at low temperatures. The use of a softer binder as a base binder would help increase the MPP modification rates, but this hypothesis needs to be validated experimentally.
Förderung
- Natural Sciences and Engineering Research Council of Canada
- ALLRP
- Peel Plastic Products Ltd.
- Yellowline Asphalt Products Ltd.
- Steed & Evans Ltd.
Zitieren
APA
Qabur, A., Baaj, H., & El-Hakim, M. (2024). Exploring the low-temperature performance of MPP-modified asphalt binders and mixtures using wet method. Canadian Journal of Civil Engineering, 51(5), 489-507. https://doi.org/10.1139/cjce-2023-0306
Vancouver
Qabur A, Baaj H, El-Hakim M. Exploring the low-temperature performance of MPP-modified asphalt binders and mixtures using wet method. Canadian Journal of Civil Engineering. 2024;51(5):489-507. doi:10.1139/cjce-2023-0306
BibTeX
@article{Qabur2024,
author = {Qabur, Ali and Baaj, Hassan and El-Hakim, Mohab},
title = {Exploring the low-temperature performance of MPP-modified asphalt binders and mixtures using wet method},
journal = {Canadian Journal of Civil Engineering},
year = {2024},
volume = {51},
number = {5},
pages = {489--507},
doi = {10.1139/cjce-2023-0306}
}
EUVIMED