Dynamic Fracture Behavior of Modified Asphalt Mixtures: Experimental SCB Testing and XFEM Simulation Under Varying Temperatures and Notch Depths
Buildings · 16.11.2026 · 16 (22) · 4566
DOI: 10.3390/buildings16224566 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 16.11.2026. Verfasst von Abdullah Demirbag und 1 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study investigated the temperature- and geometry-dependent dynamic fracture response of unmodified and modified asphalt mixtures using semi-circular bending (SCB) tests and extended finite element method (XFEM) simulations. Mixtures containing SBS, Enprene 611, Enprene 701 and crumb rubber were evaluated alongside unmodified and processed controls. SCB specimens with a radius of 75 mm, thickness of 50 mm, and support span of 120 mm were tested at −20, 0, 20, and 40 °C. Initial notch depths of 10, 20, and 30 mm corresponded to notch-to-radius ratios of 0.133, 0.267, and 0.400. Repeated haversine loading was applied at a maximum load equal to 50% of the corresponding static SCB peak load, and crack mouth opening displacement (CMOD) was recorded against load repetitions. For the reported static reference tests, increasing temperature from −20 to 40 °C reduced the peak load from 13,420 to 544 N for the 10 mm notch and from 5901 to 196 N for the 30 mm notch. The tested modified mixtures generally exhibited a later transition to accelerated CMOD development than the controls, with differences varying across temperatures, notch depths, and dosages. However, incomplete mixture-specific volumetric characterization prevents these differences from being attributed exclusively to binder modification, because differences in compactability and internal structure may also have contributed. A two-dimensional plane-strain XFEM model employed a maximum principal stress criterion for damage initiation and an energy-based traction–separation relationship for subsequent crack evolution. The simulations generally reproduced the gradual-to-rapid CMOD transition and relative mixture differences, while discrepancies increased near failure. The findings support condition-dependent mixture comparison but indicate that independently determined fracture parameters and explicit viscoelastic modeling are needed to improve predictive reliability.
Zitieren
APA
Demirbag, A., & Cambay, E. (2026). Dynamic Fracture Behavior of Modified Asphalt Mixtures: Experimental SCB Testing and XFEM Simulation Under Varying Temperatures and Notch Depths. Buildings, 16(22), 4566. https://doi.org/10.3390/buildings16224566
Vancouver
Demirbag A, Cambay E. Dynamic Fracture Behavior of Modified Asphalt Mixtures: Experimental SCB Testing and XFEM Simulation Under Varying Temperatures and Notch Depths. Buildings. 2026;16(22):4566. doi:10.3390/buildings16224566
BibTeX
@article{Demirbag2026,
author = {Demirbag, Abdullah and Cambay, Ertugrul},
title = {Dynamic Fracture Behavior of Modified Asphalt Mixtures: Experimental SCB Testing and XFEM Simulation Under Varying Temperatures and Notch Depths},
journal = {Buildings},
year = {2026},
volume = {16},
number = {22},
pages = {4566},
doi = {10.3390/buildings16224566}
}
EUVIMED