EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Studying effects of cutting parameters on surface roughness in external turning of steel

Thanh Thuong Huynh, Nguyen Quoc Huy Pham, Kha Tran, Buu Loc Tu

JOURNAL OF SCIENCE AND DEVELOPMENT ECONOMICS · 20.04.2026 · (2) · 129-138

DOI: 10.64632/jsde.eng.2.2026.798 ↗

Kurz gefasst

Fachartikel in der Zeitschrift JOURNAL OF SCIENCE AND DEVELOPMENT ECONOMICS, online erschienen am 20.04.2026. Verfasst von Thanh Thuong Huynh und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, the effects of cutting parameters including cutting speed (v), feed rate (f), and depth of cut (t) on surface roughness during external turning of C45 steel were examined. The machining process was carried out on a Mazak 150SG CNC lathe using WNMG431PP CA525 inserts (Kyocera Precision Tools, TAC08616). Taguchi analysis and Factorial design were employed to identify the significant factors affecting surface roughness and to determine the accurate regression equation. The results showed that feed rate had the most crucial influence on surface roughness, followed by cutting speed and depth of cut, which had the least effect. A regression model based on a Factorial design showed a slight advantage in accuracy and predictive performance over the Taguchi design within the investigated parameter range. The regression model is found to be suitable for predicting surface roughness in precision external turning operations.

Zitieren

APA

Huynh, T. T., Pham, N. Q. H., Tran, K., & Tu, B. L. (2026). Studying effects of cutting parameters on surface roughness in external turning of steel. JOURNAL OF SCIENCE AND DEVELOPMENT ECONOMICS, 129-138. https://doi.org/10.64632/jsde.eng.2.2026.798

Vancouver

Huynh TT, Pham NQH, Tran K, Tu BL. Studying effects of cutting parameters on surface roughness in external turning of steel. JOURNAL OF SCIENCE AND DEVELOPMENT ECONOMICS. 2026:129-138. doi:10.64632/jsde.eng.2.2026.798

BibTeX
@article{Huynh2026,
  author = {Huynh, Thanh Thuong and Pham, Nguyen Quoc Huy and Tran, Kha and Tu, Buu Loc},
  title = {Studying effects of cutting parameters on surface roughness in external turning of steel},
  journal = {JOURNAL OF SCIENCE AND DEVELOPMENT ECONOMICS},
  year = {2026},
  number = {2},
  pages = {129--138},
  doi = {10.64632/jsde.eng.2.2026.798}
}
Kostenlos starten →