EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study of Effects of MoS2 Nanofluid MQL Parameters on Cutting Forces and Surface Roughness in Hard Turning Using CBN Insert

Ngo Minh Tuan, Tran The Long, Tran Bao Ngoc

Fluids · 22.06.2023 · 8 (7) · 188

DOI: 10.3390/fluids8070188 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fluids, online erschienen am 22.06.2023. Verfasst von Ngo Minh Tuan und 2 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Thai Nguyen University of Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lubrication and cooling in hard machining is an urgent and growing concern. The use of a suitable cooling lubrication condition is a crucial factor and has a great influence on the machining efficiency and the machined surface quality in hard machining. Among the proposed technological solutions, minimum quantity lubrication (MQL) using nano-cutting oils is a novel solution and its effectiveness has been proven for hard turning. This work aims to investigate the influence of MQL technological parameters using MoS2 nano-cutting oil including nanoparticle concentration, air pressure, and air flow rate on surface roughness and the resultant cutting force in hard turning using CBN inserts. Box-Behnken optimal experimental design and ANOVA analysis were used to study the influence of the input parameters and determine the optimal values. The results present the influence of the survey parameters and provide technological guides for specific objective functions for further sustainable studies on MQL hard turning using nano-cutting oil.

Förderung

  • Thai Nguyen University of Technology

Zitieren

APA

Tuan, N. M., Long, T. T., & Ngoc, T. B. (2023). Study of Effects of MoS2 Nanofluid MQL Parameters on Cutting Forces and Surface Roughness in Hard Turning Using CBN Insert. Fluids, 8(7), 188. https://doi.org/10.3390/fluids8070188

Vancouver

Tuan NM, Long TT, Ngoc TB. Study of Effects of MoS2 Nanofluid MQL Parameters on Cutting Forces and Surface Roughness in Hard Turning Using CBN Insert. Fluids. 2023;8(7):188. doi:10.3390/fluids8070188

BibTeX
@article{Tuan2023,
  author = {Tuan, Ngo Minh and Long, Tran The and Ngoc, Tran Bao},
  title = {Study of Effects of MoS2 Nanofluid MQL Parameters on Cutting Forces and Surface Roughness in Hard Turning Using CBN Insert},
  journal = {Fluids},
  year = {2023},
  volume = {8},
  number = {7},
  pages = {188},
  doi = {10.3390/fluids8070188}
}
Kostenlos starten →