EUVIMEDEUVIMED entdecken
Crossref

Experimental Evaluation of Surface Roughness and Cutting Forces in Turning of 1.2379 Tool Steel: Role of Cutting Parameters and Tool Nose Radius

Hakan Yurtkuran

Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji · 30.06.2026 · 14 (2) · 851-864

DOI: 10.29109/gujsc.1918469 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, online erschienen am 30.06.2026. Verfasst von Hakan Yurtkuran. Die Arbeit nennt 40 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Machining performance in turning is governed by both cutting conditions and tool geometry. This study focuses on how cutting parameters and tool nose radius influence surface roughness and cutting forces during the machining of 1.2379 (X153CrMoV12) cold work tool steel. Two tool cutting-edge nose radius values of 0.2 mm and 0.8 mm were considered under different combinations of feed rate, cutting speed, and depth of cut. Surface roughness and cutting force data obtained from the experiments were analyzed using statistical and graphical approaches, including response surface evaluation and variance analysis. The results showed that feed rate plays a leading role in determining surface roughness, while cutting speed has a secondary influence and depth of cut remains limited in effect. Regarding the cutting forces, both feed rate and depth of cut contributed significantly, whereas cutting speed had a relatively minor impact. Similar trends were observed for both tool nose radius. Although a larger radius resulted in slightly higher cutting forces, its overall influence on machining performance was not pronounced. The findings indicate that machining behavior is predominantly controlled by cutting parameters rather than tool geometry, and appropriate parameter selection is essential for achieving improved surface quality and efficient cutting performance.

Zitieren

APA

Yurtkuran, H. (2026). Experimental Evaluation of Surface Roughness and Cutting Forces in Turning of 1.2379 Tool Steel: Role of Cutting Parameters and Tool Nose Radius. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 14(2), 851-864. https://doi.org/10.29109/gujsc.1918469

Vancouver

Yurtkuran H. Experimental Evaluation of Surface Roughness and Cutting Forces in Turning of 1.2379 Tool Steel: Role of Cutting Parameters and Tool Nose Radius. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji. 2026;14(2):851-864. doi:10.29109/gujsc.1918469

BibTeX
@article{Yurtkuran2026,
  author = {Yurtkuran, Hakan},
  title = {Experimental Evaluation of Surface Roughness and Cutting Forces in Turning of 1.2379 Tool Steel: Role of Cutting Parameters and Tool Nose Radius},
  journal = {Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji},
  year = {2026},
  volume = {14},
  number = {2},
  pages = {851--864},
  doi = {10.29109/gujsc.1918469}
}
Kostenlos starten →