EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design Of a Novel Low-Cost 3D-Printed Respiratory MuscleTrainer for Post-Covid Rehabilitation for LMIC

Arjan Knulst, Dipendra Kandel, Joshua Riggsbee, Sarah Riggsbee, Jenny Dankelman

Journal of Biomedical Engineering Systems and Technologies for LMICs · 07.02.2026 · 1 (1)

DOI: 10.64510/0yfxsy67 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Biomedical Engineering Systems and Technologies for LMICs, online erschienen am 07.02.2026. Verfasst von Arjan Knulst und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Respiratory Muscle Trainers (RMTs) are proven to be useful in improving the condition of patients after breathing-related conditions like COVID-19 or COPD. These RMT devices are neither well-available nor affordable in most Low- and Middle-Income Countries. Therefore, the aim of the study was to design a low cost RMT. Requirements were formulated based on discussions with clinical staff. A 3D printed design was made and a number of prototypes produced. The design was evaluated in a pilot study. Most important requirement was to have a calibrated expiratory pressure range of 0 to 80 cmH2O. A number of RMT devices were produced using a 3D printer. The calibrated design was successfully tested on technical specifications. Material costs of the final design was USD 1.30. A short clinical test indicated positive effect on the condition of a post-COVID patient. This study showed that it is possible to design an effective, affordable 3D printed RMT device that needs no more resources than a 3D printer, PETG filament, and a well-available spring. The initial clinical tests indicated the effectiveness of the device, as the condition of a post-COVID patient rapidly improved after using the device. Future research is required to further validate the clinical effectiveness of the novel device.

Zitieren

APA

Knulst, A., Kandel, D., Riggsbee, J., Riggsbee, S., & Dankelman, J. (2026). Design Of a Novel Low-Cost 3D-Printed Respiratory MuscleTrainer for Post-Covid Rehabilitation for LMIC. Journal of Biomedical Engineering Systems and Technologies for LMICs, 1(1). https://doi.org/10.64510/0yfxsy67

Vancouver

Knulst A, Kandel D, Riggsbee J, Riggsbee S, Dankelman J. Design Of a Novel Low-Cost 3D-Printed Respiratory MuscleTrainer for Post-Covid Rehabilitation for LMIC. Journal of Biomedical Engineering Systems and Technologies for LMICs. 2026;1(1). doi:10.64510/0yfxsy67

BibTeX
@article{Knulst2026,
  author = {Knulst, Arjan and Kandel, Dipendra and Riggsbee, Joshua and Riggsbee, Sarah and Dankelman, Jenny},
  title = {Design Of a Novel Low-Cost 3D-Printed Respiratory MuscleTrainer for Post-Covid Rehabilitation for LMIC},
  journal = {Journal of Biomedical Engineering Systems and Technologies for LMICs},
  year = {2026},
  volume = {1},
  number = {1},
  doi = {10.64510/0yfxsy67}
}
Kostenlos starten →