Experimental Characterization of Materials for Structural Airframe Elements of a Multirotor UAV
Metalurgija · 2025
DOI: 10.64486/m.65.2.7 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metalurgija, 2025. Verfasst von Petar Piljek und 3 weiteren Autor:innen.
Abstract (Originalsprache)
This work presents a cost-efficient experimental framework for characterizing structural materials used in rotor arms of multirotor UAVs. A set of specimens, including FDM-printed PLA and PETG with varying wall thicknesses and infill percentages, and CFF-printed Onyx reinforced with fiberglass, was evaluated against a commercially established reference (S500). Static deflection tests revealed that increasing the wall number and infill in PETG specimens reduces deflection at the expense of mass, with the selected PETG design achieving ~30 % lower deflection and ~20 % lower mass than the commercial airframe. CFF specimens showed superior stiffness but were considerably more expensive and required significantly longer production times. The study demonstrates that low-cost experimental testing provides useful mechanical data, supporting the design of lighter, structurally efficient rotor arms.
Zitieren
APA
Piljek, P., Kotarski, D., Keran, Z., & Krznar, M. (2025). Experimental Characterization of Materials for Structural Airframe Elements of a Multirotor UAV. Metalurgija. https://doi.org/10.64486/m.65.2.7
Vancouver
Piljek P, Kotarski D, Keran Z, Krznar M. Experimental Characterization of Materials for Structural Airframe Elements of a Multirotor UAV. Metalurgija. 2025. doi:10.64486/m.65.2.7
BibTeX
@article{Piljek2025,
author = {Piljek, Petar and Kotarski, Denis and Keran, Zdenka and Krznar, Matija},
title = {Experimental Characterization of Materials for Structural Airframe Elements of a Multirotor UAV},
journal = {Metalurgija},
year = {2025},
doi = {10.64486/m.65.2.7}
}
EUVIMED