EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Structural Optimization and Experimental Validation of a Composite Engine Mount Designed for VTOL UAV

Milica Milić, Jelena Svorcan, Toni Ivanov, Ivana Atanasovska, Dejan Momčilović, Željko Flajs, Boško Rašuo

Aerospace · 24.02.2025 · 12 (3) · 178

DOI: 10.3390/aerospace12030178 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Aerospace, online erschienen am 24.02.2025. Verfasst von Milica Milić und 6 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of science, technological development and innovation of Republic of Serbia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Unmanned air vehicles (UAVs) with vertical take-off and landing (VTOL) capabilities, equipped with rotors, have been gaining popularity in recent years for their numerous applications. Through joint efforts, engineers and researchers try to make these novel aircraft more maneuverable and reliable, but also lighter, more efficient and quieter. This paper presents the optimization of one of the vital aircraft parts, the composite engine mount, based on the genetic algorithm (GA) combined with the defined finite element (FE) parameterized model. The mount structure is assumed as a layered carbon composite whose lay-up sequence, defined by layer thicknesses and orientations, is being optimized with the goal of achieving its minimal mass with respect to different structural constraints (failure criteria or maximal strain). To achieve a sufficiently reliable structure, a worst-case scenario, representing a sudden impact, is assumed by introducing forces at one end, while the mount is structurally constrained at the places where it is connected to wings. The defined optimization methodology significantly facilitated and accelerated the mount design process, after which it was manufactured and experimentally tested. Static forces representing the two thrust forces generated by the propellers connected to electric engines (at 100% throttle and the asymmetric case where one engine is at approximately 40% throttle and the other at 100%) and loads from the tail surfaces were introduced by weights, while the strain was measured at six different locations. Satisfactory comparison between numerical and experimental results is achieved, while slight inconsistencies can be attributed to manufacturing errors and idealizations of the FE model.

Förderung

  • Ministry of science, technological development and innovation of Republic of Serbia

Zitieren

APA

Milić, M., Svorcan, J., Ivanov, T., Atanasovska, I., Momčilović, D., Flajs, Ž., & Rašuo, B. (2025). Structural Optimization and Experimental Validation of a Composite Engine Mount Designed for VTOL UAV. Aerospace, 12(3), 178. https://doi.org/10.3390/aerospace12030178

Vancouver

Milić M, Svorcan J, Ivanov T, Atanasovska I, Momčilović D, Flajs Ž, et al. Structural Optimization and Experimental Validation of a Composite Engine Mount Designed for VTOL UAV. Aerospace. 2025;12(3):178. doi:10.3390/aerospace12030178

BibTeX
@article{Mili2025,
  author = {Milić, Milica and Svorcan, Jelena and Ivanov, Toni and Atanasovska, Ivana and Momčilović, Dejan and Flajs, Željko and Rašuo, Boško},
  title = {Structural Optimization and Experimental Validation of a Composite Engine Mount Designed for VTOL UAV},
  journal = {Aerospace},
  year = {2025},
  volume = {12},
  number = {3},
  pages = {178},
  doi = {10.3390/aerospace12030178}
}
Kostenlos starten →