EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

Influence of Feedstock Type and Pyrolysis Temperature on Biochar Performance for Carwash Wastewater Treatment and Reuse.

Ghazwan D. Khudeeda, Shawkat Ahmed Yaseen Kochary

Zanin Journal of Science and Engineering · 2026

DOI: 10.64362/zjse.268 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Zanin Journal of Science and Engineering, 2026. Verfasst von Ghazwan D. Khudeeda und 1 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Concerns about sustainable water resource management have increased the demand for efficient and cost-effective approaches to treat carwash wastewater, which commonly contains significant concentrations of suspended solids, oil and grease, surfactants, and heavy metals, and to enable its safe reuse. This study investigated the performance of six biochars derived from the lignocellulosic feedstocks Populus nigra, Eucalyptus camaldulensis, and Quercus aegilops, pyrolysed at 400 °C and 500 °C, for carwash wastewater treatment and potential reuse. Fixed-bed column experiments were conducted to evaluate the removal of oil and grease, anionic surfactants, and selected heavy metals (Cu, Pb, Mn, Fe, and Cd). Oil and grease removal efficiencies ranged from 81.5% to 97.5%, and anionic surfactant removal efficiencies from 82.6% to 92.9%, with A2 (Populus nigra, 500 °C) achieving the highest removal of both. Pb and Cd were generally not detected or were below the analytical reporting limit in treated effluents; therefore, their removal was interpreted qualitatively. The 500 °C biochars B2 (Eucalyptus camaldulensis) and C2 (Quercus aegilops) showed the most stable performance, maintaining low or non-detectable effluent concentrations of Cu, Pb, and Cd, with lower Fe and Mn release than the 400 °C biochars. Conversely, some 400 °C biochars showed fluctuating metal removal and evidence of Mn and Fe leaching. These findings confirm that feedstock type and pyrolysis temperature critically determine biochar effectiveness. Plant-derived biochars show considerable potential as sustainable, low-cost adsorbents for improving carwash wastewater quality; however, further assessment against relevant non-potable reuse standards is required before confirming reuse suitability.

Zitieren

APA

Khudeeda, G. D., & Kochary, S. A. Y. (2026). Influence of Feedstock Type and Pyrolysis Temperature on Biochar Performance for Carwash Wastewater Treatment and Reuse. Zanin Journal of Science and Engineering. https://doi.org/10.64362/zjse.268

Vancouver

Khudeeda GD, Kochary SAY. Influence of Feedstock Type and Pyrolysis Temperature on Biochar Performance for Carwash Wastewater Treatment and Reuse. Zanin Journal of Science and Engineering. 2026. doi:10.64362/zjse.268

BibTeX
@article{Khudeeda2026,
  author = {Khudeeda, Ghazwan D. and Kochary, Shawkat Ahmed Yaseen},
  title = {Influence of Feedstock Type and Pyrolysis Temperature on Biochar Performance for Carwash Wastewater Treatment and Reuse},
  journal = {Zanin Journal of Science and Engineering},
  year = {2026},
  doi = {10.64362/zjse.268}
}
Kostenlos starten →