EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of biochar feedstock and pyrolysis temperature on mortar performance: a multiscale investigation

Amjad H. Albayati, Zaid S. Aljoumaily, Mohammed Z. Al-Mulali, Mazen Al-Kheetan, Seyed H. Ghaffar

Royal Society Open Science · 04.11.2026 · 13 (11)

DOI: 10.1098/rsos.260896 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Royal Society Open Science, online erschienen am 18.11.2026. Verfasst von Amjad H. Albayati und 4 weiteren Autor:innen. Die Arbeit nennt 81 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigated the influence of biochar feedstock type and pyrolysis temperature on the fresh, mechanical, physical and durability-related properties of cement mortar. Biochars derived from cow dung (A), waste wood (W) and date seeds (S) were produced at 500, 700 and 900°C and used as a 5% cement replacement by weight. Both feedstock type and pyrolysis temperature influenced mortar performance. W500 achieved the highest 28-day compressive strength (91.3 MPa), representing a 43.67% increase over the control, while S500 and S700 achieved the highest flexural strength (4.10 MPa), corresponding to a 24.24% increase. Biochar incorporation increased water-accessible porosity, sorptivity and permeability relative to the control; however, all three properties decreased with increasing pyrolysis temperature within each biochar series. Here, X-ray diffraction (XRD), Fourier transform infrared (FTIR) and energy-dispersive X-ray (XRD) spectroscopy characterization showed feedstock- and temperature-dependent changes in biochar physicochemical characteristics, including increased carbon content and structural ordering and reduced oxygen-containing functional groups with increasing pyrolysis temperature. Effect-size analysis (η2) revealed a property-dependent influence of the investigated factors: feedstock type contributed more to compressive strength and density, whereas pyrolysis temperature contributed more to water-accessible porosity, sorptivity and permeability; flexural strength showed comparable contributions from both factors. Overall, the results demonstrate that no single feedstock–temperature combination maximized all mortar properties, highlighting the need to select the biochar feedstock and pyrolysis conditions according to the targeted performance requirement.

Zitieren

APA

Albayati, A. H., Aljoumaily, Z. S., Al-Mulali, M. Z., Al-Kheetan, M., & Ghaffar, S. H. (2026). Influence of biochar feedstock and pyrolysis temperature on mortar performance: a multiscale investigation. Royal Society Open Science, 13(11). https://doi.org/10.1098/rsos.260896

Vancouver

Albayati AH, Aljoumaily ZS, Al-Mulali MZ, Al-Kheetan M, Ghaffar SH. Influence of biochar feedstock and pyrolysis temperature on mortar performance: a multiscale investigation. Royal Society Open Science. 2026;13(11). doi:10.1098/rsos.260896

BibTeX
@article{Albayati2026,
  author = {Albayati, Amjad H. and Aljoumaily, Zaid S. and Al-Mulali, Mohammed Z. and Al-Kheetan, Mazen and Ghaffar, Seyed H.},
  title = {Influence of biochar feedstock and pyrolysis temperature on mortar performance: a multiscale investigation},
  journal = {Royal Society Open Science},
  year = {2026},
  volume = {13},
  number = {11},
  doi = {10.1098/rsos.260896}
}
Kostenlos starten →