Biochar from lab-scale pyrolysis: influence of feedstock and operational temperature
Biomass Conversion and Biorefinery · 2024-03 · 14 (5) · 5901-5911
DOI: 10.1007/s13399-021-01303-5 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biomass Conversion and Biorefinery, online erschienen am 04.02.2021. Verfasst von Giovanni Ferraro und 7 weiteren Autor:innen. Die Arbeit wurde bisher 51-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Università degli Studi di Firenze.
Abstract (Originalsprache)
Biochar properties are highly dependent on the feedstock type and operational conditions during thermochemical processing, in particular slow pyrolysis. To clarify this aspect, nine biochars were produced by pyrolyzing in a macro TGA at 400, 550, and 650 °C three different decorticated and chopped biomasses. The studied biomasses are representative of conifer (black pine) and deciduous (poplar and willow) woods. Biochar surface area, size, and shape of pores were investigated by means of nitrogen adsorption isotherm, Hg porosimetry, and electron microscopy. The results indicate that biochars with high surface area can be obtained at high temperature, especially starting from pine feedstock. Regarding porosity, micro-pores (1–10 nm) are not remarkably affected by the starting feedstocks, while macro-pores (> 10 nm) are strictly connected with the morphology of the starting wood. More than the surface area, we found a strong correlation between the chemical composition (elemental composition and FTIR) of the biochars and their retention and release capacity of ions (cation exchange capacity, CEC). The trend in the CEC, determined via coupled approach by spectrophotometric and ion chromatography, reveals that the increase in the processing temperature has the effect of reducing the number of functional groups able of exchanging the cations with the equilibrium solution. This work represents a step forward in the characterization of the char produced by pyrolysis of biomass thanks to the development of a multi-technique approach allowing to obtain a structure-property correlation of the biochars. Our results and experimental approach can help in the optimization of the parameters used in the preparation of these materials. Graphical abstract
Förderung
- Università degli Studi di Firenze
Zitieren
APA
Ferraro, G., Pecori, G., Rosi, L., Bettucci, L., Fratini, E., Casini, D., Rizzo, A. M., & Chiaramonti, D. (2024). Biochar from lab-scale pyrolysis: influence of feedstock and operational temperature. Biomass Conversion and Biorefinery, 14(5), 5901-5911. https://doi.org/10.1007/s13399-021-01303-5
Vancouver
Ferraro G, Pecori G, Rosi L, Bettucci L, Fratini E, Casini D, et al. Biochar from lab-scale pyrolysis: influence of feedstock and operational temperature. Biomass Conversion and Biorefinery. 2024;14(5):5901-5911. doi:10.1007/s13399-021-01303-5
BibTeX
@article{Ferraro2024,
author = {Ferraro, Giovanni and Pecori, Giuditta and Rosi, Luca and Bettucci, Lorenzo and Fratini, Emiliano and Casini, David and Rizzo, Andrea Maria and Chiaramonti, David},
title = {Biochar from lab-scale pyrolysis: influence of feedstock and operational temperature},
journal = {Biomass Conversion and Biorefinery},
year = {2024},
volume = {14},
number = {5},
pages = {5901--5911},
doi = {10.1007/s13399-021-01303-5}
}
EUVIMED