EUVIMEDEUVIMED entdecken
Crossref

Quadratic Response Surface Modeling of Surface Roughness in CBN Grinding of HARDOX 500

Tuan Vo Thanh, Anh Le Hoang, Tu Ho Xuan, Cuong Nguyen Manh

VLUTE JOURNAL OF SCIENCE · 28.03.2026 · 1 (1)

DOI: 10.64215/dgj87530 ↗

Kurz gefasst

Fachartikel in der Zeitschrift VLUTE JOURNAL OF SCIENCE, online erschienen am 28.03.2026. Verfasst von Tuan Vo Thanh und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the influence of grinding parameters on surface roughness (Ra) in grinding HARDOX 500 steel with a CBN wheel, using a quadratic Response Surface Methodology (RSM). A full quadratic model, including linear, interaction, and squared terms, was initially developed and subsequently simplified through stepwise selection based on the Akaike Information Criterion (AIC). The full model achieved R² = 0.987 and adjusted R² = 0.964, while the simplified model achieved R² = 0.985 and adjusted R² = 0.974, indicating strong predictive capability with reduced complexity. Analysis of variance (ANOVA) and partial effect size (η²) revealed that the squared term of depth of cut (t²) exerted the dominant and statistically significant influence on Ra (p < 0.001). In contrast, spindle speed, feed rate, and their higher-order terms played only minor or negligible roles. Diagnostic plots confirmed model adequacy, with residuals evenly distributed and predicted values closely matching experimental data. The findings highlight that precise control of depth of cut is the key factor in achieving the desired surface quality when grinding HARDOX 500 steel, providing practical guidance for optimizing process parameters in industrial applications.

Zitieren

APA

Thanh, T. V., Hoang, A. L., Xuan, T. H., & Manh, C. N. (2026). Quadratic Response Surface Modeling of Surface Roughness in CBN Grinding of HARDOX 500. VLUTE JOURNAL OF SCIENCE, 1(1). https://doi.org/10.64215/dgj87530

Vancouver

Thanh TV, Hoang AL, Xuan TH, Manh CN. Quadratic Response Surface Modeling of Surface Roughness in CBN Grinding of HARDOX 500. VLUTE JOURNAL OF SCIENCE. 2026;1(1). doi:10.64215/dgj87530

BibTeX
@article{Thanh2026,
  author = {Thanh, Tuan Vo and Hoang, Anh Le and Xuan, Tu Ho and Manh, Cuong Nguyen},
  title = {Quadratic Response Surface Modeling of Surface Roughness in CBN Grinding of HARDOX 500},
  journal = {VLUTE JOURNAL OF SCIENCE},
  year = {2026},
  volume = {1},
  number = {1},
  doi = {10.64215/dgj87530}
}
Kostenlos starten →