Grinding Performance Evaluation of Additively Manufactured Vitrified Bond Grinding Wheel: Tool Wear, Grinding Force, Surface Roughness, and Surface Topography Analysis
International Journal of Precision Engineering and Manufacturing-Green Technology · 2025-09 · 12 (5) · 1385-1400
DOI: 10.1007/s40684-024-00684-y ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Precision Engineering and Manufacturing-Green Technology, online erschienen am 17.01.2025. Verfasst von Mohsen Barmouz und 1 weiteren Autor:innen. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: zentrales innovationsprogramm mittelstand, Hochschule Furtwangen.
Abstract (Originalsprache)
Additive manufacturing processes have revolutionized the tool fabrication process by offering unique advantages, including rapid prototyping, reduced material waste, easy customization, and a wide range of materials. This study leverages vat photopolymerization (VPP) technology to fabricate a high-porosity (53%) vitrified grinding wheel with a high abrasive concentration (C200). The high porosity of the material benefits coolant flow, chip clearance, and thermal management, which are essential for reducing grinding forces, extending the tool's lifespan, and enhancing the surface quality of the material being processed. A series of comprehensive experiments have been conducted to evaluate the performance of printed grinding wheels. The results from the grinding experiments showed that the fabricated grinding wheel exhibited excellent performance, achieving ground parts with smooth surfaces (Ra = 0.45 µm for a material removal volume of 62.5 mm 3 ), high accuracy (tool wear of up to 40 µm for the same volume), and stable grinding conditions (grinding force of 5 N). Additionally, the grinding wheel demonstrated reduced loading and extended tool life, particularly at lower material removal volumes. A comparison of various grinding parameters revealed that utilizing a depth of cut of 25µm caused more advantages for grinding performance than a lower depth of cut at the same material removal rate. This combination resulted in higher surface quality (25% less R a value), reduced tool wear (18–50% less wear), decreased wheel loading, and a more uniform surface.
Förderung
- zentrales innovationsprogramm mittelstand
- Hochschule Furtwangen
Zitieren
APA
Barmouz, M., & Azarhoushang, B. (2025). Grinding Performance Evaluation of Additively Manufactured Vitrified Bond Grinding Wheel: Tool Wear, Grinding Force, Surface Roughness, and Surface Topography Analysis. International Journal of Precision Engineering and Manufacturing-Green Technology, 12(5), 1385-1400. https://doi.org/10.1007/s40684-024-00684-y
Vancouver
Barmouz M, Azarhoushang B. Grinding Performance Evaluation of Additively Manufactured Vitrified Bond Grinding Wheel: Tool Wear, Grinding Force, Surface Roughness, and Surface Topography Analysis. International Journal of Precision Engineering and Manufacturing-Green Technology. 2025;12(5):1385-1400. doi:10.1007/s40684-024-00684-y
BibTeX
@article{Barmouz2025,
author = {Barmouz, Mohsen and Azarhoushang, Bahman},
title = {Grinding Performance Evaluation of Additively Manufactured Vitrified Bond Grinding Wheel: Tool Wear, Grinding Force, Surface Roughness, and Surface Topography Analysis},
journal = {International Journal of Precision Engineering and Manufacturing-Green Technology},
year = {2025},
volume = {12},
number = {5},
pages = {1385--1400},
doi = {10.1007/s40684-024-00684-y}
}
EUVIMED