EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Design Of Piping System For Pressure Drop Testing Using Circular and Square Pipes

Arri Oktian Nugroho, Sri Poernomo Sari

Journal of Multidisciplinary Research and Technology · 28.07.2026 · 2 (2) · 68-82

DOI: 10.63891/j-mart.v2i2.180 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Multidisciplinary Research and Technology, online erschienen am 28.07.2026. Verfasst von Arri Oktian Nugroho und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Pressure drop is one of the important parameters in piping systems as it directly affects energy efficiency, fluid flow performance, and pump power requirements. Therefore, a testing device that can accurately represent fluid flow characteristics across various pipe cross-sectional shapes is required. This study aims to design a piping system as a pressure drop testing apparatus using a circular pipe with a diameter of 6 mm and a square pipe with a 6 mm side. The design process is conducted using Solidworks software to produce a three-dimensional model that is precise and easy to analyze. Fluid flow characteristic analysis is carried out through numerical simulation using Ansys Fluent, with water at 30°C as the working fluid in a closed-loop flow system driven by a centrifugal pump. The parameters analyzed include pressure drop, friction factor, and the influence of pipe cross-sectional shape, as well as pressure losses due to minor components such as elbows and transition joints. The simulation results indicate that the pipe cross-sectional shape has a significant influence on the velocity distribution and the magnitude of the pressure drop. Square pipes produce higher pressure drop values and friction factors compared to circular pipes under the same flow conditions. This difference is caused by a less uniform flow distribution and an increased contact area between the fluid and the pipe walls. This study is expected to serve as a reference for the design of fluid mechanics testing equipment and to support learning and research related to piping systems and fluid flow analysis.

Zitieren

APA

Nugroho, A. O., & Sari, S. P. (2026). Design Of Piping System For Pressure Drop Testing Using Circular and Square Pipes. Journal of Multidisciplinary Research and Technology, 2(2), 68-82. https://doi.org/10.63891/j-mart.v2i2.180

Vancouver

Nugroho AO, Sari SP. Design Of Piping System For Pressure Drop Testing Using Circular and Square Pipes. Journal of Multidisciplinary Research and Technology. 2026;2(2):68-82. doi:10.63891/j-mart.v2i2.180

BibTeX
@article{Nugroho2026,
  author = {Nugroho, Arri Oktian and Sari, Sri Poernomo},
  title = {Design Of Piping System For Pressure Drop Testing Using Circular and Square Pipes},
  journal = {Journal of Multidisciplinary Research and Technology},
  year = {2026},
  volume = {2},
  number = {2},
  pages = {68--82},
  doi = {10.63891/j-mart.v2i2.180}
}
Kostenlos starten →