EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Performance Assessment of Biocompatible Capacitive Pressure Sensors with Circular and Square Geometries Using ANSYS Workbench

Md Shams Tabraiz Alam iD, Shabana Urooj iD, Abdul Quaiyum Ansari iD, Areiba Arif iD

Sensors · 11.04.2025 · 25 (8) · 2423

DOI: 10.3390/s25082423 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 11.04.2025. Verfasst von Md Shams Tabraiz Alam und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electrical Engineering, Jamia Millia Islamia, New Delhi 110025, India. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Princess Nourah bint Abdulrahman University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research outlines the design of capacitive pressure sensors fabricated from three biocompatible materials, featuring both circular and square geometries. The sensors were structured with a dielectric layer positioned between gold-plated electrodes at the top and bottom. Their performance was assessed through simulations conducted with ANSYS Workbench. Of the various sensor configurations tested, the circular design that included two crescent-shaped slots and a 20 µm thick PDMS dielectric material demonstrated the highest sensitivity of 10.68 fF/mmHg. This study further investigated the relationship between resonant frequency shifts and arterial blood pressure, revealing an exceptionally linear response, as evidenced by a Pearson’s correlation coefficient of −0.99986 and an R-squared value of 0.99972. This confirmed the sensor’s applicability for obtaining precise blood pressure measurements. Additionally, a 3 × 30 mm cobalt–chromium (Co-Cr) stent was obtained, and its inductance was measured using an impedance analyzer.

Schlagwörter

Stichwörter der Autor:innen

biocompatible materialscapacitive pressure sensorin-stent restenosispolydimethylsiloxane-PDMSsensor design

Autor:innen und Institutionen

  • Department of Electrical Engineering, Jamia Millia Islamia, New Delhi 110025, India.
  • Department of Electrical Engineering, College of Engineering, Princess Nourah Bint Abdulrahman University, P.O. Box 84428, Riyadh 11671, Saudi Arabia.
  • Jindal Global Business School, OP Jindal Global University, Sonipat 131001, India.

ORCID-Profile: Md Shams Tabraiz Alam, Shabana Urooj, Abdul Quaiyum Ansari, Areiba Arif

Förderung

  • Princess Nourah bint Abdulrahman University

Zitieren

APA

Alam, M. S. T., Urooj, S., Ansari, A. Q., & Arif, A. (2025). Design and Performance Assessment of Biocompatible Capacitive Pressure Sensors with Circular and Square Geometries Using ANSYS Workbench. Sensors, 25(8), 2423. https://doi.org/10.3390/s25082423

Vancouver

Alam MST, Urooj S, Ansari AQ, Arif A. Design and Performance Assessment of Biocompatible Capacitive Pressure Sensors with Circular and Square Geometries Using ANSYS Workbench. Sensors. 2025;25(8):2423. doi:10.3390/s25082423

BibTeX
@article{Alam2025,
  author = {Alam, Md Shams Tabraiz and Urooj, Shabana and Ansari, Abdul Quaiyum and Arif, Areiba},
  title = {Design and Performance Assessment of Biocompatible Capacitive Pressure Sensors with Circular and Square Geometries Using ANSYS Workbench},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {8},
  pages = {2423},
  doi = {10.3390/s25082423}
}
Kostenlos starten →