Distribution Characteristics of the Overburden Three-Zone Structure in the Goaf of a Y-Type Ventilation Working Face
Advances in Engineering Research Possibilities and Challenges · 2026-03-20 · 3 (3) · 34
DOI: 10.63313/aerpc.9079 ↗At a glance
Journal article in Advances in Engineering Research Possibilities and Challenges, published online on 2026-03-20. Written by RenRui Li and 1 co-authors. 8 references. The full text is freely available (open access, CC BY 4.0).
Abstract (original language)
To elucidate the development law of the overburden three-zone structure in the goaf of a Y-type ventilation working face, the 32010 working face of a coal mine was selected as the engineering background, and the evolutionary characteristics of the overburden three zones were investigated by combining theoretical analysis with numerical simulation. First, the formation mechanism of the overburden three-zone structure was analyzed. Second, empirical formulae were employed to estimate the heights of the caving zone and fractured zone. Finally, a UDEC numerical model was established to simulate the evolution of overburden fractures during face advance. The results indicate that the theoretical calculation gives a caving-zone height of 10.24-14.45 m and a fractured-zone height of 37.86-51.04 m. The numerical simulation shows that when the working face advances to 80 m, the caving-zone height is approximately 14 m and the fractured-zone height is approximately 55 m. The theoretical and numerical results are in good agreement, indicating that the proposed model can effectively capture the development law of the overburden three-zone structure in the goaf of a Y-type ventilation working face.
Cite
APA
Li, R., & Kong, Y. (2026). Distribution Characteristics of the Overburden Three-Zone Structure in the Goaf of a Y-Type Ventilation Working Face. Advances in Engineering Research Possibilities and Challenges, 3(3), 34. https://doi.org/10.63313/aerpc.9079
Vancouver
Li R, Kong Y. Distribution Characteristics of the Overburden Three-Zone Structure in the Goaf of a Y-Type Ventilation Working Face. Advances in Engineering Research Possibilities and Challenges. 2026;3(3):34. doi:10.63313/aerpc.9079
BibTeX
@article{Li2026,
author = {Li, RenRui and Kong, YuTing},
title = {Distribution Characteristics of the Overburden Three-Zone Structure in the Goaf of a Y-Type Ventilation Working Face},
journal = {Advances in Engineering Research Possibilities and Challenges},
year = {2026},
volume = {3},
number = {3},
pages = {34},
doi = {10.63313/aerpc.9079}
}
EUVIMED