EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on Overburden Fracture and Structural Distribution Evolution Characteristics of Coal Seam Mining in Deep Large Mining Height Working Face

Jianguo Zhang, Xiaofeng Qin, Shuaitao Liu, Haijian Su, Zhanbiao Yang, Guochuan Zhang

Sustainability · 06.09.2023 · 15 (18) · 13365

DOI: 10.3390/su151813365 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sustainability, online erschienen am 06.09.2023. Verfasst von Jianguo Zhang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Open Research Fund of State Key Laboratory of Coking Coal Exploitation and Comprehensive Utilization, China Pingmei Shenma Group.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Coal mining has gradually entered the deep mining era, and large-height mining is an important way to mine thick coal seams in the deep. The high coal wall will inevitably make the distribution of the overburden structure in the coal mining face more complicated, and the large buried depth will also cause more intense mine pressure. The study of the distribution and evolution of the overburden structure and stress in the mining site can provide theoretical guidance for safe mining. In this work, a physical similarity modeling test was carried out based on the physical–mechanical parameters of overburden rock and similarity theory, taking the mining of a deep, large-height working face in Pingdingshan Coal Mine as an example. The results show that the deformation and breakage of overburden rock in deep, large-height workings occurring during mining is persistent and not only in a short period of time. The breakage form of overburden can be categorized into two types based on the deformation characteristics: (I) non-separation-induced type, and (II) separation-induced type. Among these, the breakage induced by separation can be divided into two categories: (i) dominated by self-weight stress, and (ii) affected by shear cracks. It also summarizes the form of the overburden structure and the structural morphology of the stope. The overburden structure shows a “combined cantilever beam structure-articulated rock-slab structure-non-articulated rock-slab structure”. Among these, the periodic breakage of the upper cantilever beam evolved articulated and non-articulated rock-slab structure in the lower part, which weakened the supporting effect of the lower gangue and further aggravated the breakage of the upper overburden rock. The shape of the main structure of the stope mainly depends on the fracture line from the advancing coal wall to the upper overburden: from a rectangular shape without collapse to a trapezoidal shape at the initial stage of collapse, to a trapezoidal shape with multiple steps after the main roof collapse.

Förderung

  • Open Research Fund of State Key Laboratory of Coking Coal Exploitation and Comprehensive Utilization, China Pingmei Shenma Group

Zitieren

APA

Zhang, J., Qin, X., Liu, S., Su, H., Yang, Z., & Zhang, G. (2023). Study on Overburden Fracture and Structural Distribution Evolution Characteristics of Coal Seam Mining in Deep Large Mining Height Working Face. Sustainability, 15(18), 13365. https://doi.org/10.3390/su151813365

Vancouver

Zhang J, Qin X, Liu S, Su H, Yang Z, Zhang G. Study on Overburden Fracture and Structural Distribution Evolution Characteristics of Coal Seam Mining in Deep Large Mining Height Working Face. Sustainability. 2023;15(18):13365. doi:10.3390/su151813365

BibTeX
@article{Zhang2023,
  author = {Zhang, Jianguo and Qin, Xiaofeng and Liu, Shuaitao and Su, Haijian and Yang, Zhanbiao and Zhang, Guochuan},
  title = {Study on Overburden Fracture and Structural Distribution Evolution Characteristics of Coal Seam Mining in Deep Large Mining Height Working Face},
  journal = {Sustainability},
  year = {2023},
  volume = {15},
  number = {18},
  pages = {13365},
  doi = {10.3390/su151813365}
}
Kostenlos starten →