EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Distribution Characteristics of the Overburden Three-Zone Structure in the Goaf of a Y-Type Ventilation Working Face

RenRui Li, YuTing Kong

Advances in Engineering Research Possibilities and Challenges · 20.03.2026 · 3 (3) · 34

DOI: 10.63313/aerpc.9079 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Engineering Research Possibilities and Challenges, online erschienen am 20.03.2026. Verfasst von RenRui Li und 1 weiteren Autor:innen. Die Arbeit nennt 8 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To elucidate the development law of the overburden three-zone structure in the goaf of a Y-type ventilation working face, the 32010 working face of a coal mine was selected as the engineering background, and the evolutionary characteristics of the overburden three zones were investigated by combining theoretical analysis with numerical simulation. First, the formation mechanism of the overburden three-zone structure was analyzed. Second, empirical formulae were employed to estimate the heights of the caving zone and fractured zone. Finally, a UDEC numerical model was established to simulate the evolution of overburden fractures during face advance. The results indicate that the theoretical calculation gives a caving-zone height of 10.24-14.45 m and a fractured-zone height of 37.86-51.04 m. The numerical simulation shows that when the working face advances to 80 m, the caving-zone height is approximately 14 m and the fractured-zone height is approximately 55 m. The theoretical and numerical results are in good agreement, indicating that the proposed model can effectively capture the development law of the overburden three-zone structure in the goaf of a Y-type ventilation working face.

Zitieren

APA

Li, R., & Kong, Y. (2026). Distribution Characteristics of the Overburden Three-Zone Structure in the Goaf of a Y-Type Ventilation Working Face. Advances in Engineering Research Possibilities and Challenges, 3(3), 34. https://doi.org/10.63313/aerpc.9079

Vancouver

Li R, Kong Y. Distribution Characteristics of the Overburden Three-Zone Structure in the Goaf of a Y-Type Ventilation Working Face. Advances in Engineering Research Possibilities and Challenges. 2026;3(3):34. doi:10.63313/aerpc.9079

BibTeX
@article{Li2026,
  author = {Li, RenRui and Kong, YuTing},
  title = {Distribution Characteristics of the Overburden Three-Zone Structure in the Goaf of a Y-Type Ventilation Working Face},
  journal = {Advances in Engineering Research Possibilities and Challenges},
  year = {2026},
  volume = {3},
  number = {3},
  pages = {34},
  doi = {10.63313/aerpc.9079}
}
Kostenlos starten →