Kinematic Modeling of a Wearable Wrist Exoskeleton Mechanism for Flexion–Extension Motion
Micronic: Journal of Multidisciplinary Electrical and Electronics Engineering · 01.07.2026 · 86-97
DOI: 10.61220/micronic.v4i2.57 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micronic: Journal of Multidisciplinary Electrical and Electronics Engineering, online erschienen am 01.07.2026. Verfasst von Citra Wahyu Annisa R. und 4 weiteren Autor:innen.
Abstract (Originalsprache)
This study presents a finger motion modeling approach using a hand exoskeleton design to integrate biomechanics and engineering concepts within a STEAM-based learning framework. The study aims to demonstrate how kinematic modeling can be used as an instructional medium to improve conceptual understanding of human finger motion through the integration of science, engineering, and mathematics. The hand exoskeleton was designed using ring-based linkages connected by hinge joints that replicate the natural flexion–extension movement of the thumb, index, middle, ring, and little fingers. Finger motion was modeled using forward kinematics based on the Denavit–Hartenberg (D–H) method to determine the final X–Y coordinates of each fingertip. The calculated positions indicate distinct biomechanical characteristics among the fingers, where the middle finger achieved the greatest displacement (X = 44.72 mm; Y = 50.82 mm), followed by the index and ring fingers (X = 38.04 mm; Y = 43.09 mm), the thumb (X = 40.27 mm; Y = 26.10 mm), and the little finger (X = 27.09 mm; Y = 33.35 mm). These results demonstrate that the proposed linkage configuration can reproduce the natural distribution of finger positions during flexion while providing a clear visualization of biomechanical relationships between joint rotation, segment length, and fingertip displacement. As an educational model, the proposed hand exoskeleton facilitates interdisciplinary learning by integrating biomechanics, engineering design, mathematical modeling, and kinematic analysis within a STEAM approach. This study provides an alternative instructional framework for teaching finger biomechanics through mechanical modeling and quantitative analysis.
Zitieren
APA
R., C. W. A., Mappakaya, S. R., Marliana, M., Sentosa, I., & R, A. A. (2026). Kinematic Modeling of a Wearable Wrist Exoskeleton Mechanism for Flexion–Extension Motion. Micronic: Journal of Multidisciplinary Electrical and Electronics Engineering, 86-97. https://doi.org/10.61220/micronic.v4i2.57
Vancouver
R. CWA, Mappakaya SR, Marliana M, Sentosa I, R AA. Kinematic Modeling of a Wearable Wrist Exoskeleton Mechanism for Flexion–Extension Motion. Micronic: Journal of Multidisciplinary Electrical and Electronics Engineering. 2026:86-97. doi:10.61220/micronic.v4i2.57
BibTeX
@article{R2026,
author = {R., Citra Wahyu Annisa and Mappakaya, Soghi Ratu and Marliana, Mely and Sentosa, Ilham and R, Ahmad Ashari},
title = {Kinematic Modeling of a Wearable Wrist Exoskeleton Mechanism for Flexion–Extension Motion},
journal = {Micronic: Journal of Multidisciplinary Electrical and Electronics Engineering},
year = {2026},
pages = {86--97},
doi = {10.61220/micronic.v4i2.57}
}
EUVIMED