EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Biomimetic Tendon-Based Mechanism for Finger Flexion and Extension in a Soft Hand Exoskeleton: Design and Experimental Assessment

Mohamed H Abdelhafiz, Lotte N S Andreasen Struijk iD, Strahinja Dosen iD, Erika G Spaich iD

Sensors · 17.02.2023 · 23 (4) · 2272

DOI: 10.3390/s23042272 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 17.02.2023. Verfasst von Mohamed H Abdelhafiz und 3 weiteren Autor:innen. Beteiligte Einrichtung: Neurorehabilitation Systems Group, Department of Health Science and Technology, Aalborg University, 9260 Gistrup, Denmark. Hauptthemen laut MEDLINE: Biomimetics, Exoskeleton Device. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study proposes a bioinspired exotendon routing configuration for a tendon-based mechanism to provide finger flexion and extension that utilizes a single motor to reduce the complexity of the system. The configuration was primarily inspired by the extrinsic muscle–tendon units of the human musculoskeletal system. The function of the intrinsic muscle–tendon units was partially compensated by adding a minor modification to the configuration of the extrinsic units. The finger kinematics produced by this solution during flexion and extension were experimentally evaluated on an artificial finger and compared to that obtained using the traditional mechanism, where one exotendon was inserted at the distal phalanx. The experiments were conducted on nine healthy subjects who wore a soft exoskeleton glove equipped with the novel tendon mechanism. Contrary to the traditional approach, the proposed mechanism successfully prevented the hyperextension of the distal interphalangeal (DIP) and the metacarpophalangeal (MCP) joints. During flexion, the DIP joint angles produced by the novel mechanism were smaller than the angles generated by the traditional approach for the same proximal interphalangeal (PIP) joint angles. This provided a flexion trajectory closer to the voluntary flexion motion and avoided straining the interphalangeal coupling between the DIP and PIP joints. Finally, the proposed solution generated similar trajectories when applied to a stiff artificial finger (simulating spasticity). The results, therefore, demonstrate that the proposed approach is indeed an effective solution for the envisioned soft hand exoskeleton system.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

BiomimeticsExoskeleton DeviceHumansUpper ExtremityHandTendons

Stichwörter der Autor:innen

assistive deviceshand exoskeletonrehabilitation devicestendon-based systems

Autor:innen und Institutionen

  • Neurorehabilitation Systems Group, Department of Health Science and Technology, Aalborg University, 9260 Gistrup, Denmark.
  • Neurorehabilitation Robotics and Engineering Group, Center for Rehabilitation Robotics, Department of Health Science and Technology, Aalborg University, 9260 Gistrup, Denmark.

ORCID-Profile: Lotte N S Andreasen Struijk, Strahinja Dosen, Erika G Spaich

Zitieren

APA

Abdelhafiz, M. H., Andreasen Struijk, L. N. S., Dosen, S., & Spaich, E. G. (2023). Biomimetic Tendon-Based Mechanism for Finger Flexion and Extension in a Soft Hand Exoskeleton: Design and Experimental Assessment. Sensors, 23(4), 2272. https://doi.org/10.3390/s23042272

Vancouver

Abdelhafiz MH, Andreasen Struijk LNS, Dosen S, Spaich EG. Biomimetic Tendon-Based Mechanism for Finger Flexion and Extension in a Soft Hand Exoskeleton: Design and Experimental Assessment. Sensors. 2023;23(4):2272. doi:10.3390/s23042272

BibTeX
@article{Abdelhafiz2023,
  author = {Abdelhafiz, Mohamed H and Andreasen Struijk, Lotte N S and Dosen, Strahinja and Spaich, Erika G},
  title = {Biomimetic Tendon-Based Mechanism for Finger Flexion and Extension in a Soft Hand Exoskeleton: Design and Experimental Assessment},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {4},
  pages = {2272},
  doi = {10.3390/s23042272}
}
Kostenlos starten →