EUVIMEDEUVIMED entdecken
Crossref

Effect of post curing different temperatures on 3D denture hardness printed by DLP and LCD 3D printers

Israa Mezel Hassan, Ihab Nafea Yaseen

Journal of Medical and Oral Biosciences · 2025

DOI: 10.58564/jmob.107 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Medical and Oral Biosciences, 2025. Verfasst von Israa Mezel Hassan und 1 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Post-curing temperature plays a vital role in enhancing the mechanical properties of denturebase resins fabricated using 3D printing technologies such as Digital Light Processing (DLP) and Liquid Crystal Display (LCD) printers. In this study, the surface hardness of denture base specimens was evaluated following post-curing treatments at 60°C and 80°C. The results demonstrated that increasing the post-curing temperature significantly improved the hardness of samples from both printer types. DLP-printed samples showed greater improvements in hardness compared to LCD-printed samples across both temperature ranges. This difference is due to the higher energy exposure and more efficient photopolymerization of DLP systems. Both the LCD and DLP groups performed significantly better in hardness at 60°C compared to the control group. This indicates improved polymer bonding. Post-curing at 80°C produced the highest hardness values, particularly for the DLP group, suggesting that higher temperatures may help form denser polymer networks. Despite these benefits, it is important to take precautions to prevent material degradation or stress at higher processing temperatures. The results suggest that post-curing 3D-printed denture bases at 80°C may increase their surface hardness. Furthermore, DLP-produced materials perform better mechanically than LCD-printed ones

Zitieren

APA

Hassan, I. M., & Yaseen, I. N. (2025). Effect of post curing different temperatures on 3D denture hardness printed by DLP and LCD 3D printers. Journal of Medical and Oral Biosciences. https://doi.org/10.58564/jmob.107

Vancouver

Hassan IM, Yaseen IN. Effect of post curing different temperatures on 3D denture hardness printed by DLP and LCD 3D printers. Journal of Medical and Oral Biosciences. 2025. doi:10.58564/jmob.107

BibTeX
@article{Hassan2025,
  author = {Hassan, Israa Mezel and Yaseen, Ihab Nafea},
  title = {Effect of post curing different temperatures on 3D denture hardness printed by DLP and LCD 3D printers},
  journal = {Journal of Medical and Oral Biosciences},
  year = {2025},
  doi = {10.58564/jmob.107}
}
Kostenlos starten →