EUVIMEDSkopri EUVIMED
Crossref

Evaluasi Tubes Plugging terhadap Kinerja Kondensor PLTU Adipala

Eri Prabowo, Trassanda Scudetto Widestomo Putra, Arash

JTM : JURNAL TEKNIK MESIN · 2026-08-01 · 2 (2) · 130-136

DOI: 10.58466/mxrx6568 ↗

At a glance

Journal article in JTM : JURNAL TEKNIK MESIN, published online on 2026-08-01. Written by Eri Prabowo and 2 co-authors.

AstrattDettalji biblijografiċiCiteRelated studies

Abstract (original language)

This study evaluates the effect of tubes plugging on the condenser performance of Unit 1 at PLTU Adipala 1x660 MW. The analysis used operating data before plugging on 26 October 2017, 26 October 2018, and 29 November 2018, and after plugging on 29 October 2017, 2 November 2018, and 9 February 2019. Condenser performance was assessed using logarithmic mean temperature difference (LMTD), temperature rise (TR), heat-transfer area, heat load, and overall heat-transfer coefficient (U). The results show that after the third plugging condition, LMTD decreased to 7.413 °C in condenser A and 8.145 °C in condenser B, while TR decreased to 9.855 °C and 8.716 °C, respectively. Although U increased to 29.893 kW/m².°C in condenser A and 23.732 kW/m².°C in condenser B, the increase was associated with higher cooling-water flow demand and reduced active heat-transfer area. The findings indicate that tubes plugging is effective as short-term leakage mitigation, but increasing plug quantity reduces condenser heat-transfer capacity and requires monitoring of cooling-water flow, fouling, and condenser vacuum.

Cite

APA

Prabowo, E., Putra, T. S. W., & Arash (2026). Evaluasi Tubes Plugging terhadap Kinerja Kondensor PLTU Adipala. JTM : JURNAL TEKNIK MESIN, 2(2), 130-136. https://doi.org/10.58466/mxrx6568

Vancouver

Prabowo E, Putra TSW, Arash. Evaluasi Tubes Plugging terhadap Kinerja Kondensor PLTU Adipala. JTM : JURNAL TEKNIK MESIN. 2026;2(2):130-136. doi:10.58466/mxrx6568

BibTeX
@article{Prabowo2026,
  author = {Prabowo, Eri and Putra, Trassanda Scudetto Widestomo and Arash},
  title = {Evaluasi Tubes Plugging terhadap Kinerja Kondensor PLTU Adipala},
  journal = {JTM : JURNAL TEKNIK MESIN},
  year = {2026},
  volume = {2},
  number = {2},
  pages = {130--136},
  doi = {10.58466/mxrx6568}
}
Start for free →