EUVIMEDOpdag EUVIMED
Crossref

Early Detection of Bolt Loosening Based on Thermo-elastic-plastic Interference on Vibro-acoustically Modulated Elastic Waves

Jianbin LI, Zhen ZHANG, Zhongqing Su

e-Journal of Nondestructive Testing · 2026-08 · 31 (8)

DOI: 10.58286/33997 ↗

At a glance

Journal article in e-Journal of Nondestructive Testing, 2026-08. Written by Jianbin LI and 2 co-authors.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

The detection of bolt loosening based on nonlinear vibro-acoustic modulation (VAM) often shows unignorable measurement uncertainties as a result of the non-monotonic variation of nonlinear intensity, thereby limiting its detectability for early-stage loosening. This challenge originates from the elastic-plastic change of the micro-scale rough contact under a wide range of bolt preload loosening, which cannot be analytically interpreted using conventional macro-scale interfacial stiffness models. To address this challenge, we develop a new theoretical interfacial stiffness model to analytically predict the monotonicity of nonlinear intensity in VAM techniques. In the model, the roughness-related parameters are innovatively incorporated in its power law governing the plastic asperity softening at a rough interface under contact concentration, allowing for a prediction of the non-monotonic VAM response through bolt loosening. This theoretical model is validated both numerically and experimentally, and results have demonstrated that the non-monotonic nonlinear intensity observed during the bolt loosening is attributable to the elastic-plastic evolution of the surface roughness at the bolted interface and can be quantitatively described using the developed model. With this model, , a new bolt loosening detection method based on the vibro-acoustically modulated waves is developed, by leveraging the thermo-elastic-plastic susceptibility of the modulated elastic waves under varying temperatures, referred to as thermally interfered vibro-acoustic modulation (TI-VAM). In the method, a quasi-dynamic simulation of interfacial stiffness during thermal interference on the bolted joint is integrated to predict the optimal temperature conditions for enhancing TI-VAM responses during the early loosening stage of bolted joints. Experimental validation between 10°C and 50°C confirms the effectiveness of the TI-VAM method. As the temperature rises to the optimal temperature as predicted by in the qausi-dynamic simulation, the magnitude of the nonlinear counterpart at 74% yield strength is observed to increase by 15 dB. Additionally, the modulation index shows a monotonic decrease of 25% during the early loosening stage (from 74% to 55% yield strength), thereby improving the reliability of the diagnostic process. Furthermore, the TI-VAM method demonstrates remarkable robustness over the variation of ambient temperature, indicating its adaptability to different experimental and operational conditions and potential for widespread use in practical engineering applications involving bolted connections.

Cite

APA

LI, J., ZHANG, Z., & Su, Z. (2026). Early Detection of Bolt Loosening Based on Thermo-elastic-plastic Interference on Vibro-acoustically Modulated Elastic Waves. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/33997

Vancouver

LI J, ZHANG Z, Su Z. Early Detection of Bolt Loosening Based on Thermo-elastic-plastic Interference on Vibro-acoustically Modulated Elastic Waves. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/33997

BibTeX
@article{LI2026,
  author = {LI, Jianbin and ZHANG, Zhen and Su, Zhongqing},
  title = {Early Detection of Bolt Loosening Based on Thermo-elastic-plastic Interference on Vibro-acoustically Modulated Elastic Waves},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {8},
  doi = {10.58286/33997}
}
Start for free →