Ultrasonic waves measurements in stainless steel at high temperatures with microvoid femtosecond Fiber Bragg Gratings
e-Journal of Nondestructive Testing · 2026-08 · 31 (8)
DOI: 10.58286/33797 ↗At a glance
Journal article in e-Journal of Nondestructive Testing, 2026-08. Written by Antoine Gallet and 8 co-authors.
Abstract (original language)
Measurement of guided waves at high temperatures is a major challenge in SHM for several critical applications in aerospace, nuclear and other industries. Classic piezoelectric sensors are based on lead zirconium titanate which have a Curie temperature around 350 °C preventing the use of these transducers at higher temperatures. Optical fiber sensors, based on fused silica, are intrinsically more stable at high temperatures. Particularly, regenerated and femtosecond microvoid-based Fiber Bragg Gratings (FBGs) were demonstrated to operate at temperatures exceeding 1000 °C. Ultrasonic wave measurement with FBGs can be realised using the edge filtering method, consisting of placing a narrow-band light source on the edge of the reflection peak of the grating. Strain applied to the FBG will modify the grating reflection spectrum and hence change the reflected power at the source wavelength. This power is measured and constitutes the ultrasonic signal. Among the advantages of this method, it provides a high-enough sensitivity to measure sub-micron strain and it enables high sampling rates, both being required to measure guided-waves. As FBGs are also sensitive to quasi-static strain and temperature changes, it is advantageous to use a tunable laser with a tracking algorithm to lock the laser on the edge of the grating. A home-made interrogation based on the aforementioned principles was developed. To this day, high temperature measurements of ultrasonic waves remains challenging. Particularly, the sensor’s lifespan will depend on the amplitude loss and wavelength drift of the grating, but also on its attachment especially on structures with high thermal dilatation. Hence, coupling strategies for the fiber will be discussed: indeed careful choice of the adhesive should be made. Removing the coating of the fiber can also be considered as offthe- shelf coatings have temperature limits below the one of the fiber. In this contribution, we will present measurements of ultrasonics guided waves performed at high temperatures (up to 1000 °C) in a tubular oven (cf. attached figure) with femtosecond microvoid FBGs, using the edge-filtering based interrogation system. Especially, we will illustrate its ability to measure acoustic emission signals in severe conditions hardly achievable by current monitoring solutions.
Cite
APA
Gallet, A., Recoquillay, A., Roussel, N., Albertini, J., Duval, T., Fisher, C., Carpine, R., Chapuis, B., & Laffont, G. (2026). Ultrasonic waves measurements in stainless steel at high temperatures with microvoid femtosecond Fiber Bragg Gratings. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/33797
Vancouver
Gallet A, Recoquillay A, Roussel N, Albertini J, Duval T, Fisher C, et al. Ultrasonic waves measurements in stainless steel at high temperatures with microvoid femtosecond Fiber Bragg Gratings. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/33797
BibTeX
@article{Gallet2026,
author = {Gallet, Antoine and Recoquillay, Arnaud and Roussel, Nicolas and Albertini, Julien and Duval, Théo and Fisher, Clément and Carpine, Raphaël and Chapuis, Bastien and Laffont, Guillaume},
title = {Ultrasonic waves measurements in stainless steel at high temperatures with microvoid femtosecond Fiber Bragg Gratings},
journal = {e-Journal of Nondestructive Testing},
year = {2026},
volume = {31},
number = {8},
doi = {10.58286/33797}
}
EUVIMED