EUVIMEDDescoperă EUVIMED
Crossref

Data-Driven Identification of Partial Piezoelectric Sensor Debonding and Structural Damage Using a 1D-Convolutional Autoencoder for Guided-Wave SHM

Vishnu Harikumar, Bijudas C R

e-Journal of Nondestructive Testing · 2026-08 · 31 (8)

DOI: 10.58286/33784 ↗

At a glance

Journal article in e-Journal of Nondestructive Testing, 2026-08. Written by Vishnu Harikumar and 1 co-authors.

RezumatDate bibliograficeCiteRelated studies

Abstract (original language)

Structural Health Monitoring (SHM) refers to a set of techniques for assessing structural integrity and identifying potential damage, which aids in maintenance decision-making to enhance the performance levels of the structure. The ability to travel larger distances with very little attenuation and the sensitivity towards minor damages make the Guided Waves(GWs) the most suitable technique for SHM. The GWs are generated in the structure using Piezoelectric Wafer Transducers (PWTs) that are attached to the surface of the host structure using adhesives. These adhesives provide the proper mechanical coupling between the PWTs and the host structure, enabling the necessary strain transfer between them. However, structures in service often operate under varying Environmental and Operational Conditions (EOCs), leading to possible degradation of adhesive properties or partial debonding of PWTs over time. While complete debonding of a transducer can be easily detected from the acquired guided wave signals, partial debonding presents a major challenge, as the sensor continues to operate but exhibits subtle changes in signal characteristics. These changes can distort the wavefield and mimic damage signatures, potentially resulting in false damage detection. Therefore, ensuring the health of the sensor network, particularly the detection of partially debonded transducers, is essential prior to applying guided-wave damage detection algorithms. This work proposes a data-driven framework based solely on GW measurements, employing a one-dimensional Convolutional Autoencoder (1D-CAE) to detect partially debonded piezoelectric sensors within a sensor network attached to the structure, thereby eliminating the need for additional sensing modalities such as EMI. Experiments are conducted on an aluminium plate equipped with a square PWT network, where sensors are intentionally installed with different degrees of debonding to mimic realistic degradation scenarios. The model is trained to learn intrinsic variations in GW signals caused by sensor debonding and EOCs, enabling robust separation of sensor-induced variations from actual structural damage signatures. The proposed approach achieves clear separation of bonding conditions in the latent feature space and accurate classification of sensor states, with 100% classification accuracy under experimental conditions. Robustness studies further demonstrate reliable performance at signal-to-noise ratios as low as 10 dB. A comparative assessment indicates that the CAE-based framework significantly outperforms conventional Maximum Amplitude Spectra (MAS)–based techniques, which are sensitive to sensor placement and excitation frequency. By explicitly incorporating sensor bonding assessment into the diagnostic pipeline, the proposed AI-driven approach reduces false alarms and improves confidence in real-time GW-based SHM systems using permanently bonded piezoelectric sensors.

Cite

APA

Harikumar, V., & R, B. C. (2026). Data-Driven Identification of Partial Piezoelectric Sensor Debonding and Structural Damage Using a 1D-Convolutional Autoencoder for Guided-Wave SHM. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/33784

Vancouver

Harikumar V, R BC. Data-Driven Identification of Partial Piezoelectric Sensor Debonding and Structural Damage Using a 1D-Convolutional Autoencoder for Guided-Wave SHM. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/33784

BibTeX
@article{Harikumar2026,
  author = {Harikumar, Vishnu and R, Bijudas C},
  title = {Data-Driven Identification of Partial Piezoelectric Sensor Debonding and Structural Damage Using a 1D-Convolutional Autoencoder for Guided-Wave SHM},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {8},
  doi = {10.58286/33784}
}
Start for free →