EUVIMEDEUVIMED entdecken
Crossref

Operational conditions monitoring of SHM systems applied to guided wave imaging

Maël Pénicaud, Arnaud Recoquillay, Clément Fisher, Alexandre Imperiale

e-Journal of Nondestructive Testing · 2026-08 · 31 (8)

DOI: 10.58286/34076 ↗

Kurz gefasst

Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-08. Verfasst von Maël Pénicaud und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Guided Waves are commonly used for measurements of thickness loss, presence and gravity of defects in structures such as oil&gas pipes or aeronautical structures due to their capacity to propagate over long distances and their sensibility to materials variations. Common imaging techniques include Delay-And-Sum (DAS), RAPID or Minimum Variance imaging [1][2]. These methods require a baseline to compare the current state of the structure with a previous measured state. Specifically, these techniques may be altered through varying environmental and operational conditions (EOCs) between multiple measurements. Varying EOCs may include aging of the coupling between the sensor and the structure, changes in temperature, humidity, or external loadings of the structure. As the influence of these factors may be comparable to the influence of defects in the structure on the propagating guided waves, they have to be accounted for. While some methods exist to compensate the variations such as Baseline Signal Stretch (BSS) or Optimal Baseline Selection (OBS)[3], they are either insufficient for a full range of varying conditions or very costly in required experiments, and may not be suited for industrial applications with complex environments [4]. More generally, these techniques require precise knowledge about the propagation of guided waves, for example the group velocity to locate a defect in DAS. To address these problematics, we present an optimization process aiming at retrieving effective material properties, taking into account varying EOCs, enabling to directly simulate a calibrated baseline. This process uses the same instrumentation and signals used for imaging the structure, and relies on an inverse problem posed as an optimization problem over the material properties and effective transfer functions of the sensors. Using the modal decomposition of the elastic field in a waveguide, a generic formulation of guided wave signals is proposed for comparison to experimental signals. This process aims to be robust to the type of structure (plates, pipes, complex geometries), to the presence of a defect as well as to the type of material (isotropic metals, anisotropic composites). This process is firstly applied to ideal simulation signals obtained through the CIVA software. The process is then applied to signals obtained on an aluminium plate in pristine state over a varying range of temperature (-20 to +50 °C). [1] Michaels, Jennifer E. 2008. « Detection, Localization and Characterization of Damage in Plates with an in Situ Array of Spatially Distributed Ultrasonic Sensors ». Smart Materials and Structures 17 (3): 035035. https://doi.org/10.1088/0964-1726/17/3/035035 [2] Hall, James, et Jennifer E. Michaels. 2010. « Minimum Variance Ultrasonic Imaging Applied to an in Situ Sparse Guided Wave Array ». IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control 57 (10): 2311‑23. https://doi.org/10.1109/TUFFC.2010.1692. [3] Harley, Joel B., et Jose M.F. Moura. 2012. « Scale transform signal processing for optimal ultrasonic temperature compensation ». IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control 59 (10): 2226‑36. https://doi.org/10.1109/TUFFC.2012.2448. [4] Sohn, Hoon. 2007. « Effects of Environmental and Operational Variability on Structural Health Monitoring ». Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 365 (1851): 539‑60. https://doi.org/10.1098/rsta.2006.1935.

Zitieren

APA

Pénicaud, M., Recoquillay, A., Fisher, C., & Imperiale, A. (2026). Operational conditions monitoring of SHM systems applied to guided wave imaging. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/34076

Vancouver

Pénicaud M, Recoquillay A, Fisher C, Imperiale A. Operational conditions monitoring of SHM systems applied to guided wave imaging. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/34076

BibTeX
@article{Pnicaud2026,
  author = {Pénicaud, Maël and Recoquillay, Arnaud and Fisher, Clément and Imperiale, Alexandre},
  title = {Operational conditions monitoring of SHM systems applied to guided wave imaging},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {8},
  doi = {10.58286/34076}
}
Kostenlos starten →