EUVIMEDDescoperă EUVIMED
Crossref

An improved EIS for battery state estimation: a non-invasive measurement approach

Alessio Miele, Filippo Milano, Mario Molinara, Luigi Ferrigno

e-Journal of Nondestructive Testing · 2026-07 · 31 (7)

DOI: 10.58286/33340 ↗

At a glance

Journal article in e-Journal of Nondestructive Testing, 2026-07. Written by Alessio Miele and 3 co-authors.

RezumatDate bibliograficeCiteRelated studies

Abstract (original language)

Electrochemical Impedance Spectroscopy (EIS) is a powerful and information-rich technique for assessing battery state-of-operation because it measures the electrochemical response to small-signal excitation without requiring cell disassembly or invasive detection, thus enabling noninvasive diagnostics compatible with field use [1]. A key limitation for its practical implementation in Battery Management Systems (BMS) is the measurement time for a complete frequency sweep, which can become prohibitive when low-frequency points are included (typically, several minutes are required for the application of the technique) [2]. This work introduces an optimized EIS design methodology for rapid battery state estimation, in which the measurement protocol is automatically adapted to application constraints by selecting only the most informative impedance characteristics, minimizing total measurement time [3]. The approach has been validated for both State of Charge (SoC) and State of Health (SoH) estimation. To do this, both controlled laboratory measurements on LiFePO4 cells and a publicly available dataset of lithium-ion cells were used, demonstrating that significant measurement time reductions can be achieved with limited performance degradation. Experimental results demonstrate that measurement times can be reduced by more than 95% in representative configurations, while maintaining excellent estimation performance for both SoC and SoH.

Cite

APA

Miele, A., Milano, F., Molinara, M., & Ferrigno, L. (2026). An improved EIS for battery state estimation: a non-invasive measurement approach. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33340

Vancouver

Miele A, Milano F, Molinara M, Ferrigno L. An improved EIS for battery state estimation: a non-invasive measurement approach. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33340

BibTeX
@article{Miele2026,
  author = {Miele, Alessio and Milano, Filippo and Molinara, Mario and Ferrigno, Luigi},
  title = {An improved EIS for battery state estimation: a non-invasive measurement approach},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {7},
  doi = {10.58286/33340}
}
Start for free →