EUVIMEDOpdag EUVIMED
Crossref

New Standards and Requirements for Quality Assurance in Industrial Computed Tomography

Uwe Ewert, Holger Roth, Anne-Françoise Obaton, Alain Küng, Josephine Gutekunst, Ulrich Neuschaefer-Rube, Thomas Blumensath, Fritz Horauf, Marko Katic

e-Journal of Nondestructive Testing · 2026-07 · 31 (7)

DOI: 10.58286/33156 ↗

At a glance

Journal article in e-Journal of Nondestructive Testing, 2026-07. Written by Uwe Ewert and 8 co-authors.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

The new ASTM E3375-23 standard, describing CT testing practice for cone beam geometry, requires quality assurance for CT systems. This involves monitoring the CT system and the software. There are different test specimens for measuring system parameters (e.g. spatial resolution, contrast, noise) and for measuring dimensions. The new IQIs and the algorithms for focal spot measurement as well as the new rod and hole test specimens for measuring detail detection sensitivity (DDS) are discussed in detail. All focal spot standards in the EN12543 series are being revised and transferred to ISO. A new line group standard is being developed at ISO, as well as a standard for focal spot reconstruction of hole or disc images. ASTM E3375-23 requires for CT the use of ASTM E1695-20 for measuring the modulation transfer function (MTF) and the contrast discrimination function (CDF) to monitor long-term stability. A new standard, ASTM E3505, has been developed and published that describes the determination of detail detection sensitivity, which can be calculated numerically and is also visually verifiable.

Cite

APA

Ewert, U., Roth, H., Obaton, A., Küng, A., Gutekunst, J., Neuschaefer-Rube, U., Blumensath, T., Horauf, F., & Katic, M. (2026). New Standards and Requirements for Quality Assurance in Industrial Computed Tomography. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33156

Vancouver

Ewert U, Roth H, Obaton A, Küng A, Gutekunst J, Neuschaefer-Rube U, et al. New Standards and Requirements for Quality Assurance in Industrial Computed Tomography. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33156

BibTeX
@article{Ewert2026,
  author = {Ewert, Uwe and Roth, Holger and Obaton, Anne-Françoise and Küng, Alain and Gutekunst, Josephine and Neuschaefer-Rube, Ulrich and Blumensath, Thomas and Horauf, Fritz and Katic, Marko},
  title = {New Standards and Requirements for Quality Assurance in Industrial Computed Tomography},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {7},
  doi = {10.58286/33156}
}
Start for free →