EUVIMEDObjevte EUVIMED
Crossref

Ultrasonic NDT of a multipass austenitic GTAW weld: challenges related to welding position.

Simon Delmotte, Cécile Gueudre, Marie-Aude Ploix, Jean-Christophe Vallée, Gilles Corneloup

e-Journal of Nondestructive Testing · 2026-07 · 31 (7)

DOI: 10.58286/33129 ↗

At a glance

Journal article in e-Journal of Nondestructive Testing, 2026-07. Written by Simon Delmotte and 4 co-authors.

AbstraktBibliografické údajeCiteRelated studies

Abstract (original language)

Ultrasonic non-destructive testing (NDT) of thick multipass austenitic stainless-steel welds produced by the GTAW process is challenging due to the complex propagation of ultrasonic waves in their columnar grain structure, showing a marked anisotropy. The MINA model developed by LMA aims to predict this anisotropy from welding parameters (WPS) by describing the grain orientation within the molten zone. The first version of MINA is valid for flat position welding. This new work highlights the need to develop a model capable of linking welding position and the resulting 3D grain orientation. The study aims to analyze the impact of the welding position, and therefore of gravity and related parameters, on anisotropy. This work is supported by a detailed literature review on the influence on columnar grain growth and experimental observations on single and multipass welds in various positions. The analyses show that horizontal welding produces significant transverse tilting, while vertical-up welding and lowering the travel speed influences longitudinal grain orientation. These mechanisms have consequences for the 3D deviation of the ultrasonic beam during industrial inspections. Understanding this deviation using a 3D ultrasonic wave propagation model will allow better anticipation of the final ultrasonic inspection and the selection of the optimal procedure.

Cite

APA

Delmotte, S., Gueudre, C., Ploix, M., Vallée, J., & Corneloup, G. (2026). Ultrasonic NDT of a multipass austenitic GTAW weld: challenges related to welding position. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33129

Vancouver

Delmotte S, Gueudre C, Ploix M, Vallée J, Corneloup G. Ultrasonic NDT of a multipass austenitic GTAW weld: challenges related to welding position. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33129

BibTeX
@article{Delmotte2026,
  author = {Delmotte, Simon and Gueudre, Cécile and Ploix, Marie-Aude and Vallée, Jean-Christophe and Corneloup, Gilles},
  title = {Ultrasonic NDT of a multipass austenitic GTAW weld: challenges related to welding position},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {7},
  doi = {10.58286/33129}
}
Start for free →