A Review on Fusion Welding of Dissimilar Ferritic/Austenitic Steels: Processing and Weld Zone Metallurgy
Journal of Manufacturing and Materials Processing · 04.05.2024 · 8 (3) · 96
DOI: 10.3390/jmmp8030096 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 04.05.2024. Verfasst von Fabio Giudice und 3 weiteren Autor:innen. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 90 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Dissimilar welds between ferritic and austenitic steels represent a good solution for exploiting the best performance of stainless steels at high and low temperatures and in aggressive environments, while minimizing costs. Therefore, they are widely used in nuclear and petrochemical plants; however, due to the different properties of the steels involved, the welding process can be challenging. Fusion welding can be specifically applied to connect low-carbon or low-alloy steels with high-alloy steels, which have similar melting points. The welding of thick plates can be performed with an electric arc in multiple passes or in a single pass by means of laser beam equipment. Since the microstructure and, consequently, the mechanical properties of the weld are closely related to the composition, the choice of the filler metal and processing parameters, which in turn affect the dilution rate, plays a fundamental role. Numerous technical solutions have been proposed for welding dissimilar steels and much research has developed on welding metallurgy; therefore, this article is aimed at a review of the most recent scientific literature on issues relating to the fusion welding of ferritic/austenitic steels. Two specific sections are dedicated, respectively, to electric arc and laser beam welding; finally, metallurgical issues, related to dilution and thermal field are debated in the discussion section.
Zitieren
APA
Giudice, F., Missori, S., Scolaro, C., & Sili, A. (2024). A Review on Fusion Welding of Dissimilar Ferritic/Austenitic Steels: Processing and Weld Zone Metallurgy. Journal of Manufacturing and Materials Processing, 8(3), 96. https://doi.org/10.3390/jmmp8030096
Vancouver
Giudice F, Missori S, Scolaro C, Sili A. A Review on Fusion Welding of Dissimilar Ferritic/Austenitic Steels: Processing and Weld Zone Metallurgy. Journal of Manufacturing and Materials Processing. 2024;8(3):96. doi:10.3390/jmmp8030096
BibTeX
@article{Giudice2024,
author = {Giudice, Fabio and Missori, Severino and Scolaro, Cristina and Sili, Andrea},
title = {A Review on Fusion Welding of Dissimilar Ferritic/Austenitic Steels: Processing and Weld Zone Metallurgy},
journal = {Journal of Manufacturing and Materials Processing},
year = {2024},
volume = {8},
number = {3},
pages = {96},
doi = {10.3390/jmmp8030096}
}
EUVIMED