Raw Material Ultrasonic Inspection for Aerospace: inspection of the “Dead Zone” using Shear Waves
e-Journal of Nondestructive Testing · 2026-07 · 31 (7)
DOI: 10.58286/33035 ↗At a glance
Journal article in e-Journal of Nondestructive Testing, 2026-07. Written by Dimitri Olivero and 2 co-authors.
Abstract (original language)
The nondestructive volumetric inspection of metal raw materials in aerospace industry is commonly carried out by straight beam longitudinal wave pulse-echo ultrasonic testing using FBHs (Flat Bottom Holes) as reference reflectors for equipment setup. This approach is affected by the presence of a non-inspectable layer of material below the surface known as “dead zone”. Angle beam shear waves can be used to inspect the dead zone, but manufacturing angled FBH as reference reflectors can be complicated. The scope of this paper is to define the geometry of alternative reference reflectors (e.g. notches), ensuring the same quality level of conventional FBHs. In addition, a method to compare the attenuation of shear waves in production parts and reference standards is investigated.
Cite
APA
Olivero, D., Seni, D., & Ascenzi, L. (2026). Raw Material Ultrasonic Inspection for Aerospace: inspection of the “Dead Zone” using Shear Waves. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33035
Vancouver
Olivero D, Seni D, Ascenzi L. Raw Material Ultrasonic Inspection for Aerospace: inspection of the “Dead Zone” using Shear Waves. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33035
BibTeX
@article{Olivero2026,
author = {Olivero, Dimitri and Seni, D. and Ascenzi, Lucas},
title = {Raw Material Ultrasonic Inspection for Aerospace: inspection of the “Dead Zone” using Shear Waves},
journal = {e-Journal of Nondestructive Testing},
year = {2026},
volume = {31},
number = {7},
doi = {10.58286/33035}
}
EUVIMED