Improving Image Quality in Ultrasonic Inspection for complex material Using Custom Emission
e-Journal of Nondestructive Testing · 2026-07 · 31 (7)
DOI: 10.58286/33382 ↗Kurz gefasst
Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-07. Verfasst von Ralph Abirizk und 1 weiteren Autor:innen.
Abstract (Originalsprache)
In non-destructive testing (NDT), the inspection of attenuating and dispersive industrial components is challenging due to limited penetration depth and complex ultrasonic wave propagation, which degrades the beamformed image quality. This study explores the use of long excitation signals, followed by matched filtering, to enhance the image quality in highly attenuating scenarios. Standard pulse emissions are compared with long signal emissions such as chirp and Golay sequences across different acquisition modes highlighting the benefits of increased energy efficiency and sidelobe suppression after pulse compression. A central focus of the work is the development of adaptive matched filter to compensate for frequency-dependent attenuation and distortion. Since attenuations alter the received waveform, standard matched filters relying only on the transmitted signal bandwidth become suboptimal. Performance is assessed at the image level in terms of signal-to-noise ratio (SNR), spatial resolution, and flaw detectability. Results show that long emission combined with adaptive matched filtering significantly improve SNR and flaw detectability, thereby enhancing the image quality in attenuating and structurally noisy materials.
Zitieren
APA
Abirizk, R., & Carcreff, E. (2026). Improving Image Quality in Ultrasonic Inspection for complex material Using Custom Emission. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33382
Vancouver
Abirizk R, Carcreff E. Improving Image Quality in Ultrasonic Inspection for complex material Using Custom Emission. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33382
BibTeX
@article{Abirizk2026,
author = {Abirizk, Ralph and Carcreff, Ewen},
title = {Improving Image Quality in Ultrasonic Inspection for complex material Using Custom Emission},
journal = {e-Journal of Nondestructive Testing},
year = {2026},
volume = {31},
number = {7},
doi = {10.58286/33382}
}
EUVIMED