Optimization of Cutting Parameters Affecting Cutting Force and Surface Roughness in Machining of AISI P20 Die Steel
Open Journal of Nano · 2022
DOI: 10.56171/ojn.1039567 ↗Kurz gefasst
Fachartikel in der Zeitschrift Open Journal of Nano, 2022. Verfasst von Mahir AKGÜN und 1 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 16 Literaturangaben.
Abstract (Originalsprache)
This study focuses on optimizing cutting parameters effective on cutting force (Fc) and surface roughness (Ra) in the machining of AISI P20 steel. The turning experiments have been performed in CNC lathe at three different cutting speeds (Vc) (120, 180, and 240 m/min), three different feed rates (f) (0.12 0.21 and 0.3 mm/rev), and three different depths of cut (a) (0.4, 0.8, and 1.2 mm) according to Taguchi L9 orthogonal array. The effect levels of the cutting parameters on Fc and Ra have been determined with analysis of variance (Anova). The analysis results indicate that the depth of cut is the most significant parameter affecting Fc while the feed rate is the most significant parameter affecting Ra. Moreover, the result analysis shows that cutting speed of 240 m/min, feed rate of 0.12 mm/rev, and depth of cut of 0.4 mm) factor levels were the optimum cutting parameters for the output parameters (Fc and Ra). In turning experiments performed at optimum cutting parameters, the lowest Fc and Ra values were measured as 178N and 0.412 µm, respectively.
Zitieren
APA
AKGÜN, M., & ÖZLÜ, B. (2022). Optimization of Cutting Parameters Affecting Cutting Force and Surface Roughness in Machining of AISI P20 Die Steel. Open Journal of Nano. https://doi.org/10.56171/ojn.1039567
Vancouver
AKGÜN M, ÖZLÜ B. Optimization of Cutting Parameters Affecting Cutting Force and Surface Roughness in Machining of AISI P20 Die Steel. Open Journal of Nano. 2022. doi:10.56171/ojn.1039567
BibTeX
@article{AKGN2022,
author = {AKGÜN, Mahir and ÖZLÜ, Barış},
title = {Optimization of Cutting Parameters Affecting Cutting Force and Surface Roughness in Machining of AISI P20 Die Steel},
journal = {Open Journal of Nano},
year = {2022},
doi = {10.56171/ojn.1039567}
}
EUVIMED