EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization of Cutting Parameters for Energy Efficiency in Wire Electrical Discharge Machining of AISI D2 Steel

Hugo Orlando González-Rojas, José Carlos Miranda-Valenzuela, Juan de Dios Calderón-Najera

Applied Sciences · 30.05.2024 · 14 (11) · 4701

DOI: 10.3390/app14114701 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 30.05.2024. Verfasst von Hugo Orlando González-Rojas und 2 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Improving energy efficiency in manufacturing processes is a critical global concern for the industry. Manufacturers strive to enhance energy efficiency across all manufacturing operations to remain competitive globally, aiming to reduce production times without compromising product quality. While there has been significant research characterizing energy efficiency and surface roughness in conventional processes like turning or milling, studies on unconventional manufacturing techniques are limited. This study focuses on optimizing a wire electrical discharge machining (WEDM) process to minimize energy consumption while maintaining surface roughness. Various cutting parameters, such as pulse on-time, pulse off-time, servo voltage, wire tension, wire speed, and wire voltage, were evaluated. Experiments were conducted using Taguchi’s methodology with a L27 orthogonal array, employing AISI D2 steel plates of 19 mm and 25 mm thickness as the machining material. The research identified that optimal parameters for reducing energy consumption and improving surface roughness included a pulse on-time of 10 s, pulse off-time of 11 s, servo voltage of 44 V, wire tension of 50 g-force, wire speed of 7 m per minute, and wire voltage of 9 volts. This combination led to an 8% reduction in energy consumption and a 1% enhancement in surface roughness compared to baseline values.

Zitieren

APA

González-Rojas, H. O., Miranda-Valenzuela, J. C., & Calderón-Najera, J. D. D. (2024). Optimization of Cutting Parameters for Energy Efficiency in Wire Electrical Discharge Machining of AISI D2 Steel. Applied Sciences, 14(11), 4701. https://doi.org/10.3390/app14114701

Vancouver

González-Rojas HO, Miranda-Valenzuela JC, Calderón-Najera JDD. Optimization of Cutting Parameters for Energy Efficiency in Wire Electrical Discharge Machining of AISI D2 Steel. Applied Sciences. 2024;14(11):4701. doi:10.3390/app14114701

BibTeX
@article{GonzlezRojas2024,
  author = {González-Rojas, Hugo Orlando and Miranda-Valenzuela, José Carlos and Calderón-Najera, Juan de Dios},
  title = {Optimization of Cutting Parameters for Energy Efficiency in Wire Electrical Discharge Machining of AISI D2 Steel},
  journal = {Applied Sciences},
  year = {2024},
  volume = {14},
  number = {11},
  pages = {4701},
  doi = {10.3390/app14114701}
}
Kostenlos starten →